Mojave orange mods

[Hank_]

Looks like this one from Nebo.
https://nebo.acgbrands.com/en_US/12...IYXDe9ona-7lv8rmY4aZsvt-F7uJrlucaAiJXEALw_wcB

Hank

Sponsored

 

[Lunentucker]

Nebo Davinci 12000 - Amazon (better price than Nebo's website) (edit - Well it was a few days ago)
https://smile.amazon.com/dp/B0912NLWY5

 

[Von1992]

I’m wondering the same thing. The flashlight that comes with the brackets isn’t the greatest. Could be a little smaller in diameter and could use some time of tape to make the brackets tighter to hold it better.

 

[Lunentucker]

I'll give you some measurements. Standby.

 

[Lunentucker]

 

[tmcarr]

I don't "Duck", but I do anonymously leave hitch covers under wiper blades. I print them in many different colors. I have left several orange ones on Mojave's. 3D files available on Thingaverse or Yeggi (not my design). There is also Visor Reinforcement Clip that would be a unique accent in Orange.

 

[aqcjeepGlad]

I don't "Duck", but I do anonymously leave hitch covers under wiper blades. I print them in many different colors. I have left several orange ones on Mojave's. 3D files available on Thingaverse or Yeggi (not my design). There is also Visor Reinforcement Clip that would be a unique accent in Orange.

Nice, would you mind sharing a link to the material you use that matches the Mojave orange best? Also, how much material is used to print these? I assume they are hollow but still looks like a lot. Thanks

 

[tmcarr]

I was not deliberate on finding the closest matching Mojave orange. I used what I had. https://www.amazon.com/HATCHBOX-3D-...=1668105433&sprefix=orange+pla,aps,127&sr=8-3 . There is probably a better match out there but I don't have Mojave to make a comparison. I use 10% to 15% infill and I've never counted but I probably get 7 or 8 per roll of PLA.

 

[aqcjeepGlad]

I was not deliberate on finding the closest matching Mojave orange. I used what I had. https://www.amazon.com/HATCHBOX-3D-Filament-Dimensional-Accuracy/dp/B00J0EE1D4/ref=sr_1_3?crid=1FSRFTAD20XRB&keywords=orange+pla&qid=1668105433&sprefix=orange+pla,aps,127&sr=8-3 . There is probably a better match out there but I don't have Mojave to make a comparison. I use 10% to 15% infill and I've never counted but I probably get 7 or 8 per roll of PLA.

Excellent, I noticed you had two different orange colors in your photo. That is not much material at all, will make my son happy since it's his printer and material!! Cool ideas, Thanks

 

[tmcarr]

Yeah, the orange on the left was a fluorescent and although I like it for fishing lures, it would only look good on some of those crazy SEMA builds. haha

 

[Lug]

I don't "Duck", but I do anonymously leave hitch covers under wiper blades. I print them in many different colors. I have left several orange ones on Mojave's. 3D files available on Thingaverse or Yeggi (not my design). There is also Visor Reinforcement Clip that would be a unique accent in Orange.

I'm not far from Kentucky... I need to come up there an park near you so I can get an orange one of these.

 

[Jaxmax]

A little over the top I guess but really under side, put refurbished Dana diff covers on, the name plates were shot and that big square was just calling out for something…Orange Hi-Vis reflective tape on “Steel it” painted covers……Jack

 

[Jaxmax]

Another huge expensive orange mod, but does it count when it is not really on the Mojave but you do sit on it! Rocking chairs that work on the beach even without the rug..priceless!…..Jack

Sponsored