JeepingJohn
Member
- First Name
- John
- Joined
- Oct 9, 2020
- Threads
- 3
- Messages
- 21
- Reaction score
- 10
- Location
- Oxford, NC
- Vehicle(s)
- 2020 Gladiator Rubicon
- Occupation
- Government employee
- Thread starter
- #1
After my Magnuson pooped the bed, I had to have the top end of the motor rebuilt and returned to stock. After having several issues, it is running fine now. Unfortunately, the 12V cigarette lighter socket does not have power and the factory Aux Switches don't work, as in there is no power to the switch. I checked all of the fuses and they are all okay. The switches are still unlocked, which I was concerned about because I had to have the PCM reflashed. When I depress the switch, nothing happens and the little yellow light does not turn on. Is there a common ground? I also had 6 CELs. 1 was the P1400 (Unlocked PCM) and two were the catalytic converters (they are on order). There was a U0168 and 2 B codes. B1810 and B25C7. Lost communications and low voltage codes. My next thought is to check the star connector in the glove compartment. Anywhere else I can troubleshoot before taking it to the Stealership?
Sponsored
