steffen707
Well-Known Member
- Joined
- Jan 28, 2018
- Threads
- 204
- Messages
- 8,621
- Reaction score
- 8,919
- Location
- Middle Wisconsin
- Vehicle(s)
- 2001 Jetta TDI RIP, 89' Civic SI, 2019 Pacifica Hybrid, 2020 GLADIATOR SPORT S "GLADYS"
- Thread starter
- #1
People should post their questions and others can hopefully measure for them if I don't already have the info in post 1.
Of course ANY help is appreciated, but with a thing like data, you need to start with the best possible info when planning. What I mean by this is try to get accurate measurements. Use a straight edge if possible to measure the distances between two things. For example, to measure the bed height once I get my JT, i will lay a straight edge over both bed rails, then using a tape, measure from the top of any rib on the bed, and to where the bottom of the straight edge is. This would give you a good exact number for knowing if a cooler would fit under a tonneau cover for example.
When measuring how far a tire sticks out from the fender, don't eye-ball it, put a straight edge like a yard stick across both sides of the sidewall, then measure from outer fender edge to the yardstick.
It may sound silly as hell, but it only takes a few more seconds to obtain numbers this way.
THAT BEING SAID, consider all these measurements on here to be +- a bit of error. This will be compiled with many people's help. Don't cut your fancy T track from 8020 without measuring yourself. This is just for as close to possible planning for other folks that either don't have your specific parts/vehicle, or maybe don't have ANY JT yet at all (llike poor old me).
If you discover a measurement is way off, let me know please.
Assume these are JT figures unless otherwise noted
Vehicle distance in inches Short Description Extended Description
Rubicon ~50 inches Bed Rail from ground to top of bed rail on a stock height, no weight
LE 51 3/4 Front Bed Rail from ground to top of front of bed rail, no weight, stock height
LE 53 1/2 Rear Bed Rail from ground to top of Rear of bed rail, no weight, stock height
Rubicon 17 7/8 Inside Box Height From bottom of bed to top of rail
Rubicon 17 1/4 Inside Box Height Usable From top of bed (rib) to top of rail.
Rubicon ~65" Tailgate to glass From outermost part of tailgate to the glass on the hardtop
Rubicon ~60" Inside Bed Length Inside of tailgate to inside of backwall of bed.
Rubicon 56" Bed inside width From rail to rail inside dimension
Rubicon 62" Bed Outside Width From outside of rail to outside of other rail.
Rubicon 23" Bed rail to roof From the top of the bedrail to the top of the 3 piece hardtop.
Rubicon 24" Front Axle to Fender From center of wheel cap to bottom of fender - front
Rubicon 24" Rear Axle to Fender From center of wheel cap to bottom of fender - Rear
Rubicon 77" Outside mirror to outside mirror Through the vehicle, mirror to mirror,
Rubicon 73" Ground to top From gravel to top roughly 73"
Rubicon 61" Inside bed length Length of bed when tailgate closed
Rubicon 76" Diagonal Bed length Length of bed diagonally.
Rubicon 81" Bed when open Length from back of bed to front of tailgate in open position.
Mopar 23.75x23.75x29.25 Mopar Crate Dimensions of the 2" Mopar Crate
Measurement between the wheel wells is 44.8"
WANTED:
rear seat back dimensions, width and height.
distance between the center of jackpoints under the truck
Distance from middle of B pillar to rear part of cab glass?
Overland NEEDED Front Axle to Fender From center of wheel cap to bottom of fender - front
Overland NEEDED Rear Axle to Fender From center of wheel cap to bottom of fender - Rear
??? 16" Bed to hard tonneau From highest point of truck bed to bottom of tonneau.
Of course ANY help is appreciated, but with a thing like data, you need to start with the best possible info when planning. What I mean by this is try to get accurate measurements. Use a straight edge if possible to measure the distances between two things. For example, to measure the bed height once I get my JT, i will lay a straight edge over both bed rails, then using a tape, measure from the top of any rib on the bed, and to where the bottom of the straight edge is. This would give you a good exact number for knowing if a cooler would fit under a tonneau cover for example.
When measuring how far a tire sticks out from the fender, don't eye-ball it, put a straight edge like a yard stick across both sides of the sidewall, then measure from outer fender edge to the yardstick.
It may sound silly as hell, but it only takes a few more seconds to obtain numbers this way.
THAT BEING SAID, consider all these measurements on here to be +- a bit of error. This will be compiled with many people's help. Don't cut your fancy T track from 8020 without measuring yourself. This is just for as close to possible planning for other folks that either don't have your specific parts/vehicle, or maybe don't have ANY JT yet at all (llike poor old me).
If you discover a measurement is way off, let me know please.
Assume these are JT figures unless otherwise noted
Vehicle distance in inches Short Description Extended Description
Rubicon ~50 inches Bed Rail from ground to top of bed rail on a stock height, no weight
LE 51 3/4 Front Bed Rail from ground to top of front of bed rail, no weight, stock height
LE 53 1/2 Rear Bed Rail from ground to top of Rear of bed rail, no weight, stock height
Rubicon 17 7/8 Inside Box Height From bottom of bed to top of rail
Rubicon 17 1/4 Inside Box Height Usable From top of bed (rib) to top of rail.
Rubicon ~65" Tailgate to glass From outermost part of tailgate to the glass on the hardtop
Rubicon ~60" Inside Bed Length Inside of tailgate to inside of backwall of bed.
Rubicon 56" Bed inside width From rail to rail inside dimension
Rubicon 62" Bed Outside Width From outside of rail to outside of other rail.
Rubicon 23" Bed rail to roof From the top of the bedrail to the top of the 3 piece hardtop.
Rubicon 24" Front Axle to Fender From center of wheel cap to bottom of fender - front
Rubicon 24" Rear Axle to Fender From center of wheel cap to bottom of fender - Rear
Rubicon 77" Outside mirror to outside mirror Through the vehicle, mirror to mirror,
Rubicon 73" Ground to top From gravel to top roughly 73"
Rubicon 61" Inside bed length Length of bed when tailgate closed
Rubicon 76" Diagonal Bed length Length of bed diagonally.
Rubicon 81" Bed when open Length from back of bed to front of tailgate in open position.
Mopar 23.75x23.75x29.25 Mopar Crate Dimensions of the 2" Mopar Crate
Measurement between the wheel wells is 44.8"
WANTED:
rear seat back dimensions, width and height.
distance between the center of jackpoints under the truck
Distance from middle of B pillar to rear part of cab glass?
Overland NEEDED Front Axle to Fender From center of wheel cap to bottom of fender - front
Overland NEEDED Rear Axle to Fender From center of wheel cap to bottom of fender - Rear
??? 16" Bed to hard tonneau From highest point of truck bed to bottom of tonneau.
Sponsored
Last edited: