ScottHarr_JT
Well-Known Member
- Thread starter
- #1
Soooo, I had some time to kill today after the dmv(rare) and decided I’d take a look at my backup camera to see if I could re-wire it to the top of my camper for a top down view since my tire carrier blocks it currently. After doing zero research, I decided to pull it apart and just figure it out. Well, I didn’t realize it was a coax cable that connected the camera and just cut it with the intention of splicing in new wiring. So now I’m trying to find a way to replace the cable and at the same time extend it about 4-5 feet to mount it above my camper.
Mopar’s website wasn’t very helpful, could not find just a part number for the wiring harness. So I’m wondering if any of you guys have any recommendations on an extension kit that may work plugging directly into to the factory harness(mounted behind the bumper)
here’s what I’ve found so far:
https://www.quadratec.com/p/rox-offroad/backup-camera-extension-wiring-wrangler-jl
Off Road In Mind JL Backup Camera Wire Extension Cable Compatible with (USE with OEM JL Camera Cable) 2018-2022 Jeep Wrangler https://a.co/d/9uEtfE3
Stupid mistakes=learning experience right? Thanks for the help.
Mopar’s website wasn’t very helpful, could not find just a part number for the wiring harness. So I’m wondering if any of you guys have any recommendations on an extension kit that may work plugging directly into to the factory harness(mounted behind the bumper)
here’s what I’ve found so far:
https://www.quadratec.com/p/rox-offroad/backup-camera-extension-wiring-wrangler-jl
Off Road In Mind JL Backup Camera Wire Extension Cable Compatible with (USE with OEM JL Camera Cable) 2018-2022 Jeep Wrangler https://a.co/d/9uEtfE3
Stupid mistakes=learning experience right? Thanks for the help.
Sponsored