ORACLE Ambient LED Footwell Lighting

[ORACLElights]

Oracle Lighting recently completed a footwell installation on a Jeep Wrangler JL! Check out the step by step tutorial below!

This utilizes your factory dome light along with the new Ambient Footwell Kit!

Simple mod for only $24.95+ but makes a huge difference!

Sponsored

 

[Gren71]

Neat. Will these change intensity with the knob on the panel next to the steering wheel? Or are they just am always on when the foot well light is on upgrade?

 

[ORACLElights]

Neat. Will these change intensity with the knob on the panel next to the steering wheel? Or are they just am always on when the foot well light is on upgrade?

Hey Matthew! Yes if you tap it to the courtesy lights, they can be turned on/off with the dimmer switch.

 

[Gren71]

Hey Matthew! Yes if you tap it to the courtesy lights, they can be turned on/off with the dimmer switch.

outstanding!

 

[am1978]

 

[am1978]

For others, if you go with Oracle’s footwell LEDs, JP walked me through it by PM. Yellow - 12v
Black - Ground. I used posi-taps on mine.

Driver side Yellow/Purple 12v—to oracle red, Black/Purple stripe Ground—to Oracle black.

Passenger side Yellow/Purple 12v—to oracle red, Black/Green stripe Ground—to Oracle black.

 

[Jumperdp]

For others, if you go with Oracle’s footwell LEDs, JP walked me through it by PM. Yellow - 12v
Black - Ground. I used posi-taps on mine.

Driver side Yellow/Purple 12v—to oracle red, Black/Purple stripe Ground—to Oracle black.

Passenger side Yellow/Purple 12v—to oracle red, Black/Green stripe Ground—to Oracle black.

 

[Jumperdp]

For others, if you go with Oracle’s footwell LEDs, JP walked me through it by PM. Yellow - 12v
Black - Ground. I used posi-taps on mine.

Driver side Yellow/Purple 12v—to oracle red, Black/Purple stripe Ground—to Oracle black.

Passenger side Yellow/Purple 12v—to oracle red, Black/Green stripe Ground—to Oracle black.

I wired mine this way and it only works when I open the door and then go off once the doors are closed, I, was hoping to have the leds while driving- with the doors closed, Is there another way to wire them for that?

 

[am1978]

I wired mine this way and it only works when I open the door and then go off once the doors are closed, I, was hoping to have the leds while driving- with the doors closed, Is there another way to wire them for that?

I don’t have an answer for that. Maybe @ORACLElights does.

Sponsored