Painting a Motobilt crusher bumper?

[Fawkes]

Good morning all. Has anyone painted a Motobilt crusher bumper white? Or any color other than a coating? Looking into getting one and was hoping to see a finished product

Sponsored

 

[Fouts]

don't really have what you are asking for but I painted my JCR bumper on my JL Satin Black. I just used 2 to 3 coats of spay can primer then 2 to3 coats of quality spray can paint. Prepped everything really well and turned out pretty good. Not sure that any color other than black would not work also. Possible if trying to match Jeep color may be a bit more difficult.

 

[JeepDadiator]

I just did my own paint job on the Motobilt Hammer with bull bar, fog mounts and skids. I was planning on doing a write-up if there is interest. Overall an easy job and I went a few rungs up from rattle can. I used a mid-grade Harbor Freight HVLP spray gun and automotive store primer, top and clear coats. Having built up some confidence doing the bumper I moved along to repainting my iKamper too. Pictures of the final product of both attached. I highly suggest some additional products from Harbor Freight to make this work! The spectrum universal paint system kit is a MUST. I used 'jet black' and am very happy with the results. They do offer white not sure how close it matches - here are my results and progress pics...

A few pictures:

Sponsored