Dorbritz
Well-Known Member
- Thread starter
- #16
Working on my On Board Air system using some items I've had for a bit. I wanted something removable and portable when needed.
using a 4 gallon seamless tank with a Viair 444 compressor.
Just waiting on the Swagelok fittings to come in so I can wrap it up.
Using a 200 psi pressure switch. The Viair 444 has a max 200psi. 100psi 100% and at 200 50%.
Compressor mount.
Relay mounted on the back of compressor mount.
I plan on using the bed rack system so I made a aluminum bracket to allow it to mount using T slot nuts and screw knobs.
Rubber feet to help support.
Little mock up and test fit.
Cut hole in the side of the bed to mount plug.
We have power.
I’ll get video and more pictures once the fittings come in.
Sorry so picture heavy. I am better with pictures than with words.
using a 4 gallon seamless tank with a Viair 444 compressor.
Just waiting on the Swagelok fittings to come in so I can wrap it up.
Using a 200 psi pressure switch. The Viair 444 has a max 200psi. 100psi 100% and at 200 50%.
Compressor mount.
Relay mounted on the back of compressor mount.
I plan on using the bed rack system so I made a aluminum bracket to allow it to mount using T slot nuts and screw knobs.
Rubber feet to help support.
Little mock up and test fit.
Cut hole in the side of the bed to mount plug.
We have power.
I’ll get video and more pictures once the fittings come in.
Sorry so picture heavy. I am better with pictures than with words.
Sponsored
Last edited: