Illinois Proximity Handles Add-on Harnesses

[Jimmy07]

I have a set of add-on harnesses for the proximity door handles available. These are not the entire door harness, but the missing wires/connectors for the door handles. The other end has the terminals that pin right into the missing wire locations on the main door connectors (pins 15&16). $65 shipped, PayPal.

Sponsored

 

[jbauer96]

I have a set of add-on harnesses for the proximity door handles available. These are not the entire door harness, but the missing wires/connectors for the door handles. The other end has the terminals that pin right into the missing wire locations on the main door connectors (pins 15&16). $65 shipped, PayPal.

So I would just need this, the door handle, and change the things with Jscan?

 

[Jimmy07]

So I would just need this, the door handle, and change the things with Jscan?

Correct.

 

[MNDZLJT]

I have a set of add-on harnesses for the proximity door handles available. These are not the entire door harness, but the missing wires/connectors for the door handles. The other end has the terminals that pin right into the missing wire locations on the main door connectors (pins 15&16). $65 shipped, PayPal.

Are you making these or?

 

[Jimmy07]

Are you making these or?

I built that set. If there’s interest, I do have parts to build more, so just let me know if you want a set.

 

[SFLJEEPER]

PM Sent

 

[Jimmy07]

No, the factory passive entry feature won’t work with an aftermarket door lock kit.

 

[RedIcon]

Are you making these or?

I just installed the passive mopar kit and as it turns out, I am missing wires 15 and 16. The tailgate works but not the doors. Of course. So the wires go in the connector on the body side, where do you connect the other side?

 

[trrubicon06]

Pm sent

 

[Supazuk]

I know its been a while but are you still making these?

If not any lead to where to get the factory connector for the handle

thanks jay

 

[JeepNightHawk]

I have a set of add-on harnesses for the proximity door handles available. These are not the entire door harness, but the missing wires/connectors for the door handles. The other end has the terminals that pin right into the missing wire locations on the main door connectors (pins 15&16). $65 shipped, PayPal.

Jimmy , I'm in illinois and want to install the proximity key kit. Could I ask you a few questions ?

 

[vicsvx]

Jimmy , I'm in illinois and want to install the proximity key kit. Could I ask you a few questions ?

I dmd Jimmy last year about the harness... No reply... Not sure he's active anymore?

Ended up buying the whole shebang off ebay for $150 (both Handel's, caps, and full door harness)

 

[JeepNightHawk]

I was able to get these installed and working . Took my time on the first one and took one hour . I was watching a video and moving slow. The second door took like 15 minutes . Used jscan and programmed it and that took like 10 mins. I didn't want to take the window off the track , so I squeezed my hands between the plastic panel and door. I beat up my hands doing this. Would of been easier with the window off the track . Oh well. Used jscan. Works perfect. Best add on you could do.

Sponsored