Rear bump stop measurement request w. Mopar 2" (for sumo springs)

[FL Handle Guy]

Can someone running the Mopar lift please measure the distance between the rear bump stop bucket and the bump stop extension (Mopar lower bump stop spacer) on the rear axle? If possible without a load in the bed.

I am thinking of getting a set of sumo springs since I have a topper and decked system but don't know how much sag I have introduced into the suspension with the extra weight. I have 4 inches of space between the bump stop extension and the bucket which means the sumo springs would always be in contact. I'm trying to figure out if I should add a 1/2" spacer to the rear coil or shorten the rear bump stop extension.

I have the Mopar 2" lift and added a 3/4" spacer up front.

Sponsored

 

[FL Handle Guy]

Any help would be greatly appreciated

 

[MatchingGladiators]

I added SumoSprings recently to help stabilize a loaded bed. I also have the Mopar 2" lift which has extended bump stops to compensate for the lift.
So all you need to do is swap out the crappy OEM bump stops with the SumoSprings. I wouldn't add or subtract any spacers. Just swap 'em.

Sponsored