JeepOfTheseus
Well-Known Member
It's a mild level of DIY, but this can be achieved fairly easily with existing components. There's plenty of knuckle light mounts that turn with the wheels, and plenty of switchback modules. Only thing you'd need is to wire the lights to a Normally Closed relay and energize the relay with the static/running light about of the switchback. The relay would be open (i.e. lights off) under normal operation until you hit the turn signals, in which case the switchback would de-energize the relay and close it (i.e. lights on).A pair of small spot lights, each on the inside of the wheel, activated side by side by the indicators. When moving with the wheels the can act as a cornering light.
Sponsored