Show me your bronze wheels

[Toro34]

Mopar 392 XR take-offs.
They are bronze, but depending on the lighting, they usually just look grey ¯\_(ツ)_/¯

17x8" +12mm offset (4.4" backspacing)

Sponsored

 

[MaxStrategery]

17”x8.5”, -6mm offset. Icon rebound pro (dirty)

I know this is a lot to ask but if possible could you grab a couple of photos from rear and front of your Jeep showing how far those wheels/tires are sticking out beyond fender? I am looking at some Icon wheels and -6 is all they offer, I am used to +25 Methods which are maybe an inch or so beyond fender. Thanks in advance.

 

[Aj58]

we

I know this is a lot to ask but if possible could you grab a couple of photos from rear and front of your Jeep showing how far those wheels/tires are sticking out beyond fender? I am looking at some Icon wheels and -6 is all they offer, I am used to +25 Methods which are maybe an inch or so beyond fender. Thanks in advance.

We need an official offset thread.

picture from front and rear.
With make model size and offset.

I’ve been through so many of these threads and it’s so hard to get good pictures.

 

[knowbetter]

 

[DarthAWM]

My freshly installed Dirty Life 9303s

 

[Mr.Wilson]

 

[fourfa]

I know this is a lot to ask but if possible could you grab a couple of photos from rear and front of your Jeep showing how far those wheels/tires are sticking out beyond fender? I am looking at some Icon wheels and -6 is all they offer, I am used to +25 Methods which are maybe an inch or so beyond fender. Thanks in advance.

Sure thing

 

[MaxStrategery]

Sure thing

Interesting, the -6 and +25 are pretty close. -6 poking out slightly more, and inch maybe. Thanks for those shots.

 

[antwon412]

Well. That does seem to make sense. Since that’s a difference of about 31mm / ~1.25”
?

 

[RockTrixWheels]

One of our customers beast on our Rocktrix RT115 - Modern 5 Spoke Bronze wheels 17x9 ET-12 (4.5")

We offer lots of our wheels in Bronze: https://rocktrix.com/

 

[CbtEngr8591]

Not going to stay but…

 

[Ironhide22]

17x8.5 Method MR320 and 37" Nitto Recons

Sponsored