What can we do for you?

[Baker9713]

Hey Benny, any idea when the trailer brake controllers will be available again? I have a 21 Mojave and everywhere I have looked shows them to be on back order.

Sponsored

 

[AllMoparParts.com]

Hey Benny, any idea when the trailer brake controllers will be available again? I have a 21 Mojave and everywhere I have looked shows them to be on back order.

Hi Mike,
These are gonna take about 30-60 days more to get stocked back up. There are over 500pcs on backorder and the supplier has 10ocs in route. Best bet is to place an order so that you reserve your spot.

Please let me know if you have any other questions.

- Benny

 

[Wilsonb80]

Yes here they are
x11 https://parts.allmoparparts.com/oem-parts/mopar-w-type-clip-68526185aa
x4 https://parts.allmoparparts.com/oem-parts/mopar-push-pin-6505411aa
x7 https://parts.allmoparparts.com/oem-parts/mopar-mopar-plastic-rivet-sold-individually-6506007aa

Please let me know if you have any questions.

- Benny

Thank you

 

[danelizer]

Hi Benny. Is there any discount code for the Mopar lower control arms? The extended one? Genuine Mopar Performance Front Lower Control Arm.
Thanks!

 

[AllMoparParts.com]

Hi Benny. Is there any discount code for the Mopar lower control arms? The extended one? Genuine Mopar Performance Front Lower Control Arm.
Thanks!

Hi,
Yes PM sent

- Benny

 

[Aj58]

https://www.allmoparparts.com/docs/82215331AB.pdf

Do you have parts e g and h?

 

[AllMoparParts.com]

https://www.allmoparparts.com/docs/82215331AB.pdf

Do you have parts e g and h?

I am sorry but Mopar does not list any serviceable components from this kit.

- Benny

 

[Vincentb]

My wife ordered me a Mojave dash cap in Nov/Dec and it is still on back order. She asked to cancel the order over a month ago. And since then been told several times that we would be refunded in 3-5 days, but still no refund.

 

[Jimmij]

Benny

i need the bolt that is used on the rear frame of. 2020 jt. They are used when mounting the meta cloak sway bar reinforcement . They are oem bolts and the nuts are welded inside the frame. They use a 13mm socket and are stamped with 8.8 on the head.

 

[AllMoparParts.com]

My wife ordered me a Mojave dash cap in Nov/Dec and it is still on back order. She asked to cancel the order over a month ago. And since then been told several times that we would be refunded in 3-5 days, but still no refund.

Hi Bob,
Please send me the order # or email address and I will take care of it.

Sorry for the troubles
- Benny

 

[AllMoparParts.com]

Benny

i need the bolt that is used on the rear frame of. 2020 jt. They are used when mounting the meta cloak sway bar reinforcement . They are oem bolts and the nuts are welded inside the frame. They use a 13mm socket and are stamped with 8.8 on the head.

Hi,
These are the long bolts that go through the frame correct? If so here they are
https://parts.allmoparparts.com/oem-parts/mopar-hex-head-tapping-screw-and-washer-6512886aa

Please let me know if you have any questions.

- Benny

 

[Jimmij]

They are in the rear wheel well just behind the sway bar mount. They are used to mount the metal lock sway bar reinforcement. The were already installed in the frame from the factory.

 

[jeeprrr]

Hello, im in need of 68338388AC(third brake light). I was wondering if there will be additional sales(like annual sale) towards 4th of July or any other deals?

 

[C-Lo]

Hey Benny, a few asks. I wanted to get the part numbers for the
-front and rear upper coil spring seats.
-Front LCA arms
-front and rear sway bar links that come with the Mopar 2” lift kit. I have a 2” spacer lift AEV and I’m thinking these might work as a replacement for the AEV ones since the rubber boots on them are severely degraded. You can advise me either way if they will work for the Mojave since they don’t make
A Mojave specific Mopar lift kit.

I have a 22 Mojave.
Thanks in advance.

 

[AllMoparParts.com]

They are in the rear wheel well just behind the sway bar mount. They are used to mount the metal lock sway bar reinforcement. The were already installed in the frame from the factory.

I looked further into it on the MC site and those are not the correct bolts. The bolts in that section are not shown in our data. The only way to find one at this time is to measure it, I can then search the whole catalog for a replacement.

- Benny

Sponsored