What can we do for you?

[prewdog4]

Hello,
‘So, I’m looking at having my dealer do a gear swap to your oem Mopar 4.88 gears. My question is the only thing I see listed on your website is the ring and pinion gears themselves. Is there a master kit for all the installing components, shims, bearings, etc.? Or do you have a list of needed parts for the gear swap?

Thank you, Mike

Sponsored

 

[AllMoparParts.com]

Hello,
‘So, I’m looking at having my dealer do a gear swap to your oem Mopar 4.88 gears. My question is the only thing I see listed on your website is the ring and pinion gears themselves. Is there a master kit for all the installing components, shims, bearings, etc.? Or do you have a list of needed parts for the gear swap?

Thank you, Mike

Hi Mike,
There is no kit. The service departments stock a shim assortment and we can supply the bearings if you wanted to replace those. Easiest thing is to send me your email and I will send you a quote. Also include your VIN incase I run into any questions.
- Benny

 

[prewdog4]

Thanks Benny,
So, I'm hearing you say it is ok to reuse really whatever they can? Is that right? Except like you said, shims and crush sleeves, etc? Correct?
I will try and figure out how to message you with my VIN and email...

Thanks Mike

 

[AllMoparParts.com]

Thanks Benny,
So, I'm hearing you say it is ok to reuse really whatever they can? Is that right? Except like you said, shims and crush sleeves, etc? Correct?
I will try and figure out how to message you with my VIN and email...

Thanks Mike

No Mike, Depending on mileage I would probably replace everything at that time.

Send me your email address and VIN and I will send you a quote on the parts.

- Benny

 

[b-roc]

Benny - I am looking for a few items and wanted to verify that I am getting the correct parts for VIN 1C6JJTEG7ML522435.

1) Right front fender flare (textured black) and liner.
2) Front rubicon style steel bumper and winch plate (I am aware that I will need to modify my skid plate). Last I looked, this was not available as a unit but the individual parts could be ordered (the hardware count was the difficulty)
3) Right rear fender flare (textured black) and liner.

Thanks!
-Broc

 

[AllMoparParts.com]

Benny - I am looking for a few items and wanted to verify that I am getting the correct parts for VIN 1C6JJTEG7ML522435.

1) Right front fender flare (textured black) and liner.
2) Front rubicon style steel bumper and winch plate (I am aware that I will need to modify my skid plate). Last I looked, this was not available as a unit but the individual parts could be ordered (the hardware count was the difficulty)
3) Right rear fender flare (textured black) and liner.

Thanks!
-Broc

Sure Broc here are links to them

https://parts.allmoparparts.com/oem-parts/mopar-wheel-flare-molding-right-6ce72rxfag
https://parts.allmoparparts.com/oem-parts/mopar-splash-shield-right-68351462ac
https://parts.allmoparparts.com/oem...hdG9yJnk9MjAyMCZ0PXNwb3J0JmU9My02bC12Ni1nYXM=
https://parts.allmoparparts.com/oem...unting-kit-fits-steel-front-bumper-82215182ac
https://parts.allmoparparts.com/oem-parts/mopar-wheel-opening-flare-molding-right-6jx38rxfad
https://parts.allmoparparts.com/oem-parts/mopar-splash-shield-right-68341320aa

The bumper is now available. You will also need a fairlead adapter but I will need to know if you have an on or off center winch.

- Benny

 

[DankjeeP]

Benny - I am looking for a few items and wanted to verify that I am getting the correct parts for VIN 1C6JJTEG7ML522435.

1) Right front fender flare (textured black) and liner.
2) Front rubicon style steel bumper and winch plate (I am aware that I will need to modify my skid plate). Last I looked, this was not available as a unit but the individual parts could be ordered (the hardware count was the difficulty)
3) Right rear fender flare (textured black) and liner.

Thanks!
-Broc

Hi Broc,

I just installed the steel bumper and the skid plate is significantly different. I would recommend getting the compatible one as it actually attaches to the bumper. The other one has two extra brackets that mount to the frame, since (presumably) attaching to the plastic bumper is not adequate, and things generally just don't line up with the steel bumper.

 

[AllMoparParts.com]

Hi Broc,

I just installed the steel bumper and the skid plate is significantly different. I would recommend getting the compatible one as it actually attaches to the bumper. The other one has two extra brackets that mount to the frame, since (presumably) attaching to the plastic bumper is not adequate, and things generally just don't line up with the steel bumper.

He has a Mojave and there is not one for it that is "plug and play". The best solution is to modify the existing one since its a functional steel one.

-Benny

 

[DankjeeP]

He has a Mojave and there is not one for it that is "plug and play". The best solution is to modify the existing one since its a functional steel one.

-Benny

Got it. Yeah I was surprised there are two different ones.

 

[prewdog4]

Hi Benny,
Thanks for the help on the gear swap!
One more question, can you quote me a gift for the proximity entry add please?
I believe this is it....

Thanks Mike

https://www.allmoparparts.com/part-...UVLrzmGnK84XtJPDTtnnT333j7YY8VT-DJFlf6yi5gS6U

 

[b-roc]

Benny - Thanks for the info and the discount code!

One quick double check... the first item that you linked states that it doesn't fit my 2021 mojave and that I need 6CE70RXFAG instead ... can you confirm?

@DankjeeP - Thanks for looking out for me

 

[AllMoparParts.com]

Got it. Yeah I was surprised there are two different ones.

The stock Mojave one has provisions for holding the front shock reservoirs, That's what makes it unique.

- Benny

 

[AllMoparParts.com]

Hi Benny,
Thanks for the help on the gear swap!
One more question, can you quote me a gift for the proximity entry add please?
I believe this is it....

Thanks Mike

https://www.allmoparparts.com/part-...UVLrzmGnK84XtJPDTtnnT333j7YY8VT-DJFlf6yi5gS6U

Hi Mike,
I sent you a PM

- Benny

 

[AllMoparParts.com]

Benny - Thanks for the info and the discount code!

One quick double check... the first item that you linked states that it doesn't fit my 2021 mojave and that I need 6CE70RXFAG instead ... can you confirm?

@DankjeeP - Thanks for looking out for me

The one I sent is correct and VIN verified. The online catalog is nowhere near as accurate as our dealer data.

Please let me know if you have any questions.
Thanks,
-Benny

 

[TurboCopter]

Do you have a part number for the rear bumper tow hook and the right bumper bezel?

Sponsored