What can we do for you?

[AllMoparParts.com]

I am looking for the tonneau cover…. Hard top for a 21’ built in may

Hi,
We only offer the soft ones online for purchase here https://www.allmoparparts.com/part-ymm/2021-jeep-gladiator-tonneau-cover.html You can use code 50SHIP on them.

If you specifically are looking for a hard one it would be best to buy locally as truck freight is expensive plus there is a risk of damage in transit.

Please let me know if you have any other questions.
Thanks,
-Benny

Sponsored

 

[AllMoparParts.com]

Yes for that, I circled it

Chris,

Mopar got back to me and there are no service parts announced for this kit. I believe that Bestop manufactures this for Mopar so I would reach out to them directly to see if they can assist.

Sorry I am no help in this case,
- Benny

 

[VolatileA]

Hey @AllMoparParts.com,

Do you have these parts in ready to ship?

What is the difference between the two sets?

And lastly, is this part replaceable? It's a small brace on the inner fender towards the bottom that looks to be removable so I would assume it can be ordered?

Thank you!

 

[AllMoparParts.com]

Hey @AllMoparParts.com,

Do you have these parts in ready to ship?

We show 34 in stock https://parts.allmoparparts.com/oem...ush-in-6504135?c=bD0zJm49U2VhcmNoIFJlc3VsdHM=

You'll need 12 if replacing all of them, Ill send you a code

- Benny

 

[VolatileA]

We show 34 in stock https://parts.allmoparparts.com/oem-parts/mopar-mopar-retainer-push-in-6504135?c=bD0zJm49U2VhcmNoIFJlc3VsdHM=

You'll need 12 if replacing all of them, Ill send you a code

- Benny

Check the post, I think it was a mistake because my last post was for the rail caps and fender brace.

Looking forward to your reply Benny.

 

[Trickster]

Hello,
I am looking for the install instructions for the 3 piece soft tonneau from the factory on a 21 JT.
Thanks in advance.

 

[AllMoparParts.com]

Check the post, I think it was a mistake because my last post was for the rail caps and fender brace.

Looking forward to your reply Benny.

My Bad, The 86 & 87 are used for factory tonneau cover optioned vehicles.
All of them are available to us in about 8 days. The part in your photo is not available separately from the flare.

Please let me know if you have any questions.
Thanks,
-Benny

 

[VolatileA]

My Bad, The 86 & 87 are used for factory tonneau cover optioned vehicles.
All of them are available to us in about 8 days. The part in your photo is not available separately from the flare.

Please let me know if you have any questions.
Thanks,
-Benny

The local Mopar parts store said they are on backorder, would this be included in that backorder?

Only reason I ask is because I want to figure out another solution before I place order only to be told it’s then on backorder.

Hopefully that makes sense?

Thanks Benny

 

[AllMoparParts.com]

Hello,
I am looking for the install instructions for the 3 piece soft tonneau from the factory on a 21 JT.
Thanks in advance.

Hi Rick,

I cannot find them for the OE cover only the Mopar accessory which can be found here Soft Folding Jeep Truck Bed Cover May 15, 2020 K6864109AA.cdr (chrysler.com)
I am uncertain of the exact differences. Hopefully this helps some.

- Benny

 

[AllMoparParts.com]

The local Mopar parts store said they are on backorder, would this be included in that backorder?

Only reason I ask is because I want to figure out another solution before I place order only to be told it’s then on backorder.

Hopefully that makes sense?

Thanks Benny

Only one shows actual B/O and we have that one in stock plus there are a bunch in transit on the way.

Do we have some sort of SEMA type deadline here? If so I can check the on hand inventory but which version do we need?

-Benny

 

[Trickster]

Hi Rick,

I cannot find them for the OE cover only the Mopar accessory which can be found here Soft Folding Jeep Truck Bed Cover May 15, 2020 K6864109AA.cdr (chrysler.com)
I am uncertain of the exact differences. Hopefully this helps some.

- Benny

Ty Benny.
Amazing response time.?

 

[VolatileA]

Only one shows actual B/O and we have that one in stock plus there are a bunch in transit on the way.

Do we have some sort of SEMA type deadline here? If so I can check the on hand inventory but which version do we need?

-Benny

I need both sides for the non-tonneau cover, so the 62 and 63.

Not event related but I can’t reinstall my Diamondback cover until I have new rails.

Need it for a road trip in less than 2 weeks.

Are those both on hand ready to ship?

 

[AllMoparParts.com]

I need both sides for the non-tonneau cover, so the 62 and 63.

Not event related but I can’t reinstall my Diamondback cover until I have new rails.

Need it for a road trip in less than 2 weeks.

Are those both on hand ready to ship?

Ok, Honestly if you need them in hand in 12 days I would order them locally and ask the dealer to "Special Handle" the 68343262AB , This will shave off quite a few days and is what we do as a standard. With all of the logistic delays I have seen with Fedex recently I do not want to over-promise you anything.

-Benny

 

[VolatileA]

Ok, Honestly if you need them in hand in 12 days I would order them locally and ask the dealer to "Special Handle" the 68343262AB , This will shave off quite a few days and is what we do as a standard. With all of the logistic delays I have seen with Fedex recently I do not want to over-promise you anything.

-Benny

Totally understand.

They said it was on backorder with waitlist.

If you have them in stock ready to ship, I’ll order from you right now.

I can handle some shipping time even if it’s not here in 2 weeks.

If they are in stock tho and ready to ship, I will be for expedited shipping.

 

[AllMoparParts.com]

Totally understand.

They said it was on backorder with waitlist.

If you have them in stock ready to ship, I’ll order from you right now.

I can handle some shipping time even if it’s not here in 2 weeks.

If they are in stock tho and ready to ship, I will be for expedited shipping.

Copy that, I already sent an email over to the warehouse and should hear back from them in the morning. Feel free to nudge me here if you do not hear from me by Noon

- Benny

Sponsored