wanderer
Well-Known Member
- First Name
- Ralph
- Joined
- Aug 10, 2017
- Threads
- 109
- Messages
- 418
- Reaction score
- 245
- Location
- Oakhurst, CA
- Vehicle(s)
- 2020 JT Rubicon GATOR
- Occupation
- Engineering Geologist
- Thread starter
- #1
So I was in an accident did Minor damage to the bumper the Honda was toast Barely bent my bumper. I had not transferred the winch from my old 2018 jlur to the jtr. I had pulled it off and taken the winch mount plate Artec . So I thought ? while I was getting the bumper replaced I’ll just have the dealer put it on. Right bumper is already off. No big deal Right ? Well they got the winch on but it is such a tight fit like 1/16 inch clearance front and rear. And. They couldn’t get the front lower skid plate back on. This is a dealer with a lifted Mojave with a warn Zeon on it. Wtf
It wasn’t like that on the jlur.the winch is a super winch 10k exp with synthetic line . The Jeep is a jtr rubicon the winch mount plate is artec. I am not sure but I think they left the spacers out which would move the bumper out about 3/8s inch or so and move the winch further away from grill. Does any one have any experience with this dilemma.? I should have just done it myself ughh?
It wasn’t like that on the jlur.the winch is a super winch 10k exp with synthetic line . The Jeep is a jtr rubicon the winch mount plate is artec. I am not sure but I think they left the spacers out which would move the bumper out about 3/8s inch or so and move the winch further away from grill. Does any one have any experience with this dilemma.? I should have just done it myself ughh?
Sponsored
