What can we do for you?

[yammiedude64]

Hello Benny, I would like to purchase the center honeycomb grille section for my 2020 Gladiator Rubicon, no front camera. There are 3 part numbers listed, can you tell me the correct one 6QN24RXFAD, 6QN22RXFAC or 6KN34RXFAB ? Also I am going to purchase a fuse panel cover 68465571AA, is the fuse mapping decal on the inside of the cover included? Do you have a discount code?

Sponsored

 

[AllMoparParts.com]

Hi Mark,

Use 6QN22RXFAC for the center insert. I would say yes on the label as I do not see it listed elsewhere.

Please let me know if you have any other questions.
Thanks,
-Benny

 

[namwop]

Hey Benny, any discounts on the mopar lift kit? 3.6 gasser

thanks in advance!

 

[Mbryson]

Hey Steve,
Yes they are, I will send you a code
https://www.allmoparparts.com/sku/82215652.html

- Benny

I'm interested in a brake controller as well

 

[reverse01134]

Hi,
Yes there is. Here is the part info
https://parts.allmoparparts.com/oem-parts/mopar-enclosure-to-body-seal-68477469ab

I will send you a code if your interested in ordering.
- Benny

Hi, can I get a code? I might be missing this seal as well. I've had the top on without this seal for a week, do you think there could've been any issues?

 

[Tschu8482]

Hello,

I am looking to add proximity sensors to my 2021 Gladiator Overland. It looks like the part number is PSVENTRYJTBSM. I was also looking for the harness to enable my mopar led headlight halos, I can’t seem to find them. Do you carry them?
Thank you

 

[Pakdoc]

Hi, I went to your site looking for part #27 of the Console schematic which is a u-shaped rubber molded piece that I had to pop off and all the tabs broke while retrieving a credit card that fell into the eBrake on my 2020 Gladiator Rubi. Is this item on backorder or something you can get?

Thanks

 

[AllMoparParts.com]

Hey Benny, any discounts on the mopar lift kit? 3.6 gasser

thanks in advance!

Hi,
Sorry I was out sick. I just sent you a PM with a code and details.

- Benny

 

[AllMoparParts.com]

I'm interested in a brake controller as well

Hi Marc,
I will PM you a code now

_ Benny

 

[AllMoparParts.com]

Hi, can I get a code? I might be missing this seal as well. I've had the top on without this seal for a week, do you think there could've been any issues?

Hi Sean,
PM sent. Not unless you had gone through a few monsoon's I think youll be just fine.

- Benny

 

[AllMoparParts.com]

Hello,

I am looking to add proximity sensors to my 2021 Gladiator Overland. It looks like the part number is PSVENTRYJTBSM. I was also looking for the harness to enable my mopar led headlight halos, I can’t seem to find them. Do you carry them?
Thank you

Hi Todd,
I will send a code you can use on this
https://www.allmoparparts.com/sku/psventryjtbsm.html

From my understanding 2021 and on vehicles do not require the headlamp harness just programming, Have you physically verified this yourself?

- Benny

 

[AllMoparParts.com]

Hi, I went to your site looking for part #27 of the Console schematic which is a u-shaped rubber molded piece that I had to pop off and all the tabs broke while retrieving a credit card that fell into the eBrake on my 2020 Gladiator Rubi. Is this item on backorder or something you can get?

Thanks

Hi Emery,
This part is available in a few days https://parts.allmoparparts.com/oem-parts/mopar-floor-console-bezel-6kg06tx7ab

But note that it does not include the U section that runs up vertical into the console, That part is only available with a new console assembly. If you would like a price on a console please send me your VIN.

Thanks,
- Benny

 

[MojaveMags]

Hi Benny,​

​

I recently purchased a 2020 used Mojave. The Mojave has the tow package but the truck doesn't have the hitch ball mount and hitch ball.​

​

I think it is part#'s 82213640 and 82213565? Is that what I need? Just want to have a hitch in case I need to tow anything? Are these the right parts and do you have them in stock?​

​

I am also looking for a Mopar Paint Pen for Hydro Blue - PBJ. Cannot find it anywhere?​

​

Any help would be appreciated.​

​

Mike​

 

[AllMoparParts.com]

Hi Benny,​

​

I recently purchased a 2020 used Mojave. The Mojave has the tow package but the truck doesn't have the hitch ball mount and hitch ball.​

​

I think it is part#'s 82213640 and 82213565? Is that what I need? Just want to have a hitch in case I need to tow anything? Are these the right parts and do you have them in stock?​

​

I am also looking for a Mopar Paint Pen for Hydro Blue - PBJ. Cannot find it anywhere?​

​

Any help would be appreciated.​

​

Mike​

Hi Mike,
You have a few options depending on rise or drop needed. Here are all of our offerings
https://www.allmoparparts.com/cat/2...ml?part_name=tow hitch ball,tow hitch adapter

I will send you a code you can use once your ready to checkout. Let me know which ones you are interested in and I will check availability as well.

Sorry but we do not ship paints/chemicals at this time.

- Benny

 

[Tschu8482]

Hi Todd,
I will send a code you can use on this
https://www.allmoparparts.com/sku/psventryjtbsm.html

From my understanding 2021 and on vehicles do not require the headlamp harness just programming, Have you physically verified this yourself?

- Benny

Thank you so much. Mine was built prior to the addition of the extra harness.

Sponsored