Offset of -18 or greater

[Gshane]

If any of you run a 37 inch tire on a 17 inch rim with an offset of -18 or greater and would be willing to post up a pic I’d be super grateful. I’m looking for some new wheels and the 2 I like best have pretty extreme offsets compared to present 0 offset wheels. Just trying to get a feel for what it would look like to have a little more poke. Thx in advance!

Sponsored

 

[Rummie]

Hey Shane - I answered over on FB but I'll post here as well to get it in the thread for future reference.

Nitto 37 x 12.5 x 17. Riding on 9" wheels with a 4.25" backspace giving about -19 offset.

Measured about a 3" poke.

Post fender chop.

 

[Gshane]

Hey Shane - I answered over on FB but I'll post here as well to get it in the thread for future reference.

Nitto 37 x 12.5 x 17. Riding on 9" wheels with a 4.25" backspace giving about -19 offset.

Measured about a 3" poke.

Post fender chop.

Thx a ton man! One of the ones I like a lot is 17x9 with -38 offset but if u have 3 inches of poke with these that might be a bit too much. Love the stance yours has. Thx again.

 

[MikeD93]

If any of you run a 37 inch tire on a 17 inch rim with an offset of -18 or greater and would be willing to post up a pic I’d be super grateful. I’m looking for some new wheels and the 2 I like best have pretty extreme offsets compared to present 0 offset wheels. Just trying to get a feel for what it would look like to have a little more poke. Thx in advance!

Kmc grenade beaslocks -38 offset

 

[Gshane]

Kmc grenade beaslocks -38 offset

Thank you! I love that stance. I'm looking at a couple that are 17x9 with a -38 offset but I have a Sport and I'm not sure if the the "poke" is gonna be the same as the Rubicon cuza the wider axles you have. I'm trying to figure that out... I have zero offset wheels now and on my Sport they stick out 2 inches. So I'm just afraid -38 might push it too far...

 

[MikeD93]

Thank you! I love that stance. I'm looking at a couple that are 17x9 with a -38 offset but I have a Sport and I'm not sure if the the "poke" is gonna be the same as the Rubicon cuza the wider axles you have. I'm trying to figure that out... I have zero offset wheels now and on my Sport they stick out 2 inches. So I'm just afraid -38 might push it too far...

The rubicon has the wider Dana 44’s. And these have a 3.5” backspace

 

[MikeD93]

The rubicon has the wider Dana 44’s. And these have a 3.5” backspace

 

[Gshane]

The rubicon has the wider Dana 44’s. And these have a 3.5” backspace

So does that mean -38 offset would push out farther on my sport?

I do have the HD Dana 44s...

 

[JTGuy]

I have the Method with 0 off set and wish they were like a +12. Factory is a +44. I would avoid any negative off set.

 

[bblan]

38X13.5/17 on Raceline Beadlocks -38 offset

 

[Gshane]

38X13.5/17 on Raceline Beadlocks -38 offset

Okay man - that's incredibly cool!! Thx for the pic! I'm getting more and more tempted to pull the trigger on the -38s I'm looking at... Thx again!

 

[Rahkmalla]

-38 is a lot. I'm running +6 with 315s and I thought it was too much. Put XR flare extensions on my jt to rein the poke in.

 

[Gshane]

-38 is a lot. I'm running +6 with 315s and I thought it was too much. Put XR flare extensions on my jt to rein the poke in.

Yeah it is. I'm running a zero offset right now but I really like the more aggressive stance. -38 might be too much though... I'm torn between -18 and -38.

 

[Lunentucker]

https://tiresize.com/wheel-offset-calculator/

 

[Gshane]

https://tiresize.com/wheel-offset-calculator/

Thx! I've been using it. Super helpful

Sponsored