That would be it.... and again, we haven't used this stuff on the Jeep.this stuff?
I highly doubt there's anything that'll keep the bugs off.......... I mean... Bug hits the windshield and there's splatter - that's not going to magically disappear.
I use ACE IT polish, works on the paint, glass and plastic!!!!
It was actually a packet that they discontinued for some reason. Not sure why or if it was a limited time deal, but I would look at Adam’s, Gtechniq, and Gyeon coatings. They all have glass specific coatings. The most important part for performance, as with any coating, is in the prep work. I #0000 steel wooled my windshield with isopropyl alcohol, wiped clean, then cleaned again with distilled water diluted iso, then applied the coating. Let it “flash” for the specified time, and then buffed clean with a few fresh lint-free microfibers. On most of these coatings, they suggest you allow the application area to remain in a dry environment for a minimum of 24 hours for best results. If you see any of these well known detailing chemical brands with sporadic bad reviews, it likely boils down to user error in their cases. I’ve worked in professional detailing as a hobbyist/weekend warrior for many years and user error is almost always the case with a failed coating of any kind, although there are definitely exceptions to that.
