Clayton 3.5 Overland and .5 Teraflex Level Spacer Installed on Front Springs

[Ordnanceman20]

I just finished the install of my Clayton 3.5 Overland lift and added terraflex spacer. I am so Happy with the results and the performance. I also added the Metalcloak front coil correction pads. Shocks are the Fox Racing Performance 2.0 and the Fox Racing ATS Steering Stabilizer. After the Install, I got the Gladiator to the off-road shop for Alignment and did a Balance on my Extreme Terrain Tire/Wheel combo. Drives Great! I also tested off-road, "Michigan - Sand + Mud" caught some air at the dunes. Everything performed flawlessly. The Clayton lift is Great as the Gladiator drives better than stock! The install was straightforward, with the only hard part: installing the LCA and UCA in the front. The rear was easier. Here is the Total Build list so far:

2023 Gladiator Rubicon
3.5 Clayton Overland Suspension Lift
.5 Terraflex Spacers
Metalcloak front Spring Correction Pads
Fox Racing Performance 2.0 Shocks
Fox Racing 2.0 ATS Steering Stabilizer
37.50-12.50-17 Yokohama Geolander X-MT
17x9 -12 Offset KMC XD FMJ Dark Tint Wheels
DV8 Front Stubby Bumper
Smittybuilt XMC 12k winch
N Fab Step Bars
Midland GMRS Radio with Hood Mount Stubby Antenna

Sponsored

 

[Ximoto]

Looks great! Are the Teraflex spacers on all 4 or to address rake?

 

[Ordnanceman20]

Looks great! Are the Teraflex spacers on all 4 or to address rake?

Only on the front. Def got rid of the rake

 

[Okie Gladiator]

Your JTR is looking really good...and really solid. Great choices - nicely done.

 

[rhaney02]

Gorgeous JTR. Nice job.

 

[imallcrawl]

LOVE IT!!! Beautiful

 

[OldButStillJeeping]

Nice rig. Nicely done.

 

[TheTrailGeek]

Great looking rig! I've got the metal cloak coil spring correction pads and the same lift. Hoping when I install the MC pads, it will fix the spring rub I'm experiencing.

 

[CCMOJAVE]

Hows the ride?

 

[Ordnanceman20]

Your JTR is looking really good...and really solid. Great choices - nicely done.

Thanks! I appreciate it!

 

[Ordnanceman20]

Gorgeous JTR. Nice job.

Thanks!

 

[Ordnanceman20]

LOVE IT!!! Beautiful

Thanks!

 

[Ordnanceman20]

Great looking rig! I've got the metal cloak coil spring correction pads and the same lift. Hoping when I install the MC pads, it will fix the spring rub I'm experiencing.

I will say the springs have no Bow and are perfectly straight!

 

[Ordnanceman20]

Hows the ride?

Better than stock!

 

[TheTrailGeek]

I will say the springs have no Bow and are perfectly straight!

If I EVER get mine back from Jeep, I'll throw on the correction pads and see how they look.

Sponsored