Nitto Recon Grappler 37x11.5R17 on 2020 Mojave

[Slimypirate]

That's awesome. It looks phenomenal. Did you have to add components in addition to the lift itself? How has it impacted the ride quality? That's my concern because I really like how the Mojave rides stock.

Sponsored

 

[Jeep-of-Eli]

That's awesome. It looks phenomenal. Did you have to add components in addition to the lift itself? How has it impacted the ride quality? That's my concern because I really like how the Mojave rides stock.

Thanks! I added a wheel spacers (from Amazon) just to widen up the stance a bit and Mopar 2” lift kit‘s LCA (arm only, also from Amazon) few months after the lift.

With all those minor upgrade, it rides like stock mojave. The new/longer lower control arm did not made any difference from my experience but the interwebs thinks it’ll prevent death wobble. For $50 a piece at Amazon, why not..

Here are the Amazon links:
Richeer Spacers: https://www.amazon.com/dp/B07VBX4QV5?ref=ppx_yo2ov_dt_b_product_details&th=1

Mopar 2” Lift kit LCA: https://www.amazon.com/dp/B0992TLT8Q?psc=1&ref=ppx_yo2ov_dt_b_product_details

The AEV 2” lift kit i got directly from AEV site.

 

[NSS375]

For speedometer, yes. I have the AEV Mojave 2” Spacer with ProCal kit. So i used the ProCal but not the lift kit itself yet. With the RR HD Full bumper, no rubbing on this tire at all.

Not sure if you’re still paying attention to this but where did you end up setting the tire size using the ProCal? Mine is anywhere from 1-3 mph from Google Map GPS and want to close that gap as much as possible.

thanks

 

[Jeep-of-Eli]

Not sure if you’re still paying attention to this but where did you end up setting the tire size using the ProCal? Mine is anywhere from 1-3 mph from Google Map GPS and want to close that gap as much as possible.

thanks

I set it numerous times as I can’t decide on my ideal running pressure which obviously affected the tire height. Since my last post, I remounted them on Method 705 Bead Grip wheels which also affected the height as the stock mojave wheels is only 7.5” wide. I finally decided on 30psi. So my last measurement is 35” which I entered in procal.

 

[sinisterj]

I set it numerous times as I can’t decide on my ideal running pressure which obviously affected the tire height. Since my last post, I remounted them on Method 705 Bead Grip wheels which also affected the height as the stock mojave wheels is only 7.5” wide. I finally decided on 30psi. So my last measurement is 35” which I entered in procal.

Post some pics of the 705s on you’re tires

 

[Jeep-of-Eli]

Here’s my recent ones.

Sponsored