Wiring Harness for outlet in bed, when cargo package isn't ordered..

[joemussari]

curious if this worked......BUMP

Sponsored

 

[Krash1642]

Same... how did it go, was the wiring already there...? When I did a quick look, I didn’t see any but saw the snaps for the wiring to be run Through..

 

[TheHops]

Also curious. What was the resolution here?

 

[Br4hm4]

Following

 

[teckademics67]

Anyone able to do this yet?

 

[Seansmd]

Anyone able to do this yet?

Beuller?

 

[BajaDrifter]

If you have the aux switches it is pretty easy to wire up almost anything up in the bed since you have 30A and 15A switches. The plastic cap pops off and you can put one of these weather proof panels in with switches for more lighting back there or just more 12v sockets, whatever you like actually. I rather have 12v than 110v out there and risk running down the battery.

https://www.amazon.com/dp/B01MQELA8...uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

 

[Seansmd]

If you have the aux switches it is pretty easy to wire up almost anything up in the bed since you have 30A and 15A switches. The plastic cap pops off and you can put one of these weather proof panels in with switches for more lighting back there or just more 12v sockets, whatever you like actually. I rather have 12v than 110v out there and risk running down the battery.

https://www.amazon.com/dp/B01MQELA8...uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl

So it has to be wired from the engine bay back to the hole in the bed and then wire in the link you shared?

Sounds relatively straight forward but beyond my skill set.

 

[BajaDrifter]

So it has to be wired from the engine bay back to the hole in the bed and then wire in the link you shared?

Sounds relatively straight forward but beyond my skill set.

Not too hard at all. Your aux switches are already fused with a relay, just a matter of running wire from the under hood leads or under dash leads back to the new panel. I'm using 10 ga wire from a 30amp wire.

Sponsored