Finally got her leveled. All is right with my JT now!

[PNWGladiator]

I recently had some 315/70r17’s mounted on some new wheels. My JT looked much better than stock, no rubbing, but still had some rake in the front that I wasn’t happy with. So I ordered a 2” Tuff County leveling kit with shock relocation brackets and had it installed and an alignment done. I am so happy with how it turned out. Drives great and it looks much better.

I definitely recommend a leveling kit if anyone is on the fence about it.

Here is a before picture-

After-

Sponsored

 

[Ohio JKU]

Nice! Looks good!

 

[B-RAD]

She looks awesome in the after shot. I’m glad to see that. I take delivery late October and plan to do a similar set up 33’s and no lift on 17” rims. Just haven’t found the right rims yet. Enjoy

 

[dreston]

Your JT has a perfect stance now. Nice work!

 

[pluikens]

@PNWGladiator Very nice wheel/tire/lift setup and something I'm interested in running myself. Would you mind giving me a clearance measurement from the ground to your rear lower control arm frame mount? TIA!

EDIT: If you're willing to do that and already have your tape with you, how about the height from the front door bottom seam to the ground?

 

[PNWGladiator]

@PNWGladiator Very nice wheel/tire/lift setup and something I'm interested in running myself. Would you mind giving me a clearance measurement from the ground to your rear lower control arm frame mount? TIA!

EDIT: If you're willing to do that and already have your tape with you, how about the height from the front door bottom seam to the ground?

Thanks! I’m enjoying the set up quite a bit.

Here are the measurements as requested:

 

[pluikens]

Thanks! I’m enjoying the set up quite a bit.

Here are the measurements as requested:

Thanks! Now for my wife to get home with the truck to get stock measurements.

 

[PNWGladiator]

Thanks! Now for my wife to get home with the truck to get stock measurements.

I didn’t measure the stock height before any mods. Would you mind sharing the stock measurements? I’m just curious how it compares.

 

[pluikens]

I didn’t measure the stock height before any mods. Would you mind sharing the stock measurements? I’m just curious how it compares.

Stock Gladiator Sport
Door Height I think there's some discrepancy in how we measured here. I think with the door shut and to measure the seam between the body and the bottom of the door would be better to compare. YOu should have more than 2 inches difference here if you're lifted/leveled plus the 1.5 inch sidewall difference.

Rear Lower Control Arm Mount - Your extra 1.5 inches would be from the sidewall of the bigger tires

 

[ShotCaller]

need to adjust your headlights now..people will be flashing you

 

[PDiddy]

need to adjust your headlights now..people will be flashing you

I get flashed now in my stock rubicon. The LEDs are bright.

 

[ShotCaller]

I put rubicon takeoffs on my overland. It added about 1 inch in front. I get flashed now when I tow my boat. I'm going to adjust mine soon.

 

[mtudb24]

Looks great. Well done!

Sponsored