Be careful. I don’t know what happened with the springs but I would not consider a skyjacker on par with a fabtech. I woukd make the dealer use something a good bit better if you’ve already paid for a fabtech.Picked this 2020 Overland up last week. Has a Fabtech 3” lift and the front springs are already bowing and hitting the bump stop. The dealership is having the install shop swap it out for a Skyjacker lift.
Hi Ian !Today was the day! Picked up my 2020 Gator Gladiator Rubicon from the dealer! Really excited to start testing the capability of this truck. I’m coming from a relatively heavily modified 2014 JKUS, so this will be a different beast, for sure.
The eagle-eyed will notice a few differences on this Gladiator, which is due to the fact i live in Australia. Other than the steering wheel being on the other side, the export Gladiators don’t get the high fenders of the US models, or the Rubicon spec hood. Boooo. Also, they only get 32” tires. Pretty much everything else is the same though.
I‘ll be installing a Mopar 2” lift, 35” tires, Rugged Ridge snorkel and a good winch over the next couple of months as well as setting up electrical to run a camp fridge and lighting for longer adventures.This will be my daily driver, so nothing too crazy, but it will be seeing a lot of the Aussie bush and beaches so it’s no mall crawler.
Anyhow, look forward to learning lots through this forum!
Hi Phil, sorry for the delay in replying. The answer is yes. Over here turn signals have to be yellow/orange and separate from the brake lights.
That is a good news ! Is it possible for you to take a photo of the wiring at the base of the tailight ? I need to see the colors of the electric wires. Thank you very much.
