What can we do for you?

[AllMoparParts.com]

Any idea on how long the backorder is for the Mopar LED headlight kit?

They will not be available until at least after February.

There is a work around though by purchasing the OE lamps + the jumper wiring which is available in a few weeks, Here are the links to consider

https://parts.allmoparparts.com/oem-parts/mopar-wiring-68347117ab
https://parts.allmoparparts.com/oem-parts/mopar-headlamp-left-55112879ag
https://parts.allmoparparts.com/oem-parts/mopar-headlamp-right-55112878af

And here is the installation guide K6862533AB.pdf (chrysler.com)

If your interested let me know
- Benny

Sponsored

 

[OSU11]

They will not be available until at least after February.

There is a work around though by purchasing the OE lamps + the jumper wiring which is available in a few weeks, Here are the links to consider

https://parts.allmoparparts.com/oem-parts/mopar-wiring-68347117ab
https://parts.allmoparparts.com/oem-parts/mopar-headlamp-left-55112879ag
https://parts.allmoparparts.com/oem-parts/mopar-headlamp-right-55112878af

And here is the installation guide K6862533AB.pdf (chrysler.com)

If your interested let me know
- Benny

Benny-

Thanks for the reply. It looks like I'm going to have to wait for the kit as the individual components are cost prohibitive. Appreciate the suggestion though. I'll keep an eye on the website.

 

[AllMoparParts.com]

Hello,
I’m looking for part numbers or link for black (unpainted) 2020 JT Rubicon fenders. I want to replace my JT sport fenders. Thanks for any help you can provide.

Sure here are links

https://parts.allmoparparts.com/oem-parts/mopar-wheel-flare-molding-left-6ce73rxfag
https://parts.allmoparparts.com/oem-parts/mopar-wheel-flare-molding-right-6ce72rxfag
https://parts.allmoparparts.com/oem-parts/mopar-splash-shield-left-68351463ac
https://parts.allmoparparts.com/oem-parts/mopar-splash-shield-right-68351462ac
https://parts.allmoparparts.com/oem-parts/mopar-wheel-opening-flare-molding-left-6jx39rxfad
https://parts.allmoparparts.com/oem-parts/mopar-wheel-opening-flare-molding-right-6jx38rxfad
https://parts.allmoparparts.com/oem-parts/mopar-splash-shield-left-68341321aa
https://parts.allmoparparts.com/oem-parts/mopar-splash-shield-right-68341320aa

I will send you a code you can use if interested.

- Benny

 

[Kblanton]

I have a 2021 Willys Gladiator. Got a little too close to something with the fender flare and scratched it down to the plastic. Being a Willys they are color matched to the body.

Stupid question: Are they painted at the factory or if I get a replacement will I need to have it painted?

 

[AllMoparParts.com]

I have a 2021 Willys Gladiator. Got a little too close to something with the fender flare and scratched it down to the plastic. Being a Willys they are color matched to the body.

Stupid question: Are they painted at the factory or if I get a replacement will I need to have it painted?

Hi Kevin,
You will need to get it painted

Please let me know if you have any questions.
Thanks,
-Benny

 

[atxatxatx]

Hey Benny,
would you have the part number for the REAR (rubicon) Metal bumper ? The one specifically which has the holes for the rear proximity sensors.
Also I heard that one should order the proximity sensor holders also, as the metal bumper ones are different to the plastic ones.

I'm not worried about the sliders for now.

I'd like to change the plastic one on my Mojave to the metal one, just want to be sure about the right part number as I believe there is a version with no holes also.

Much appreciated

 

[NightsX2]

Good Afternoon ~
I was wondering if you might have these specific Mopar parts in stock - or if you might know how long they will be backordered until?

6NU24TX7AB
68398209AB
68312754AC

Any information you can provide would be greatly appreciated.
Thank you & God Bless,
JD
Kansas

 

[AllMoparParts.com]

Hey Benny,
would you have the part number for the REAR (rubicon) Metal bumper ? The one specifically which has the holes for the rear proximity sensors.
Also I heard that one should order the proximity sensor holders also, as the metal bumper ones are different to the plastic ones.

I'm not worried about the sliders for now.

I'd like to change the plastic one on my Mojave to the metal one, just want to be sure about the right part number as I believe there is a version with no holes also.

Much appreciated

Hi,
There is no kit for one with rear park sensor holes similar to this https://www.allmoparparts.com/sku/82215634ab.html

You would actually have to piece everything together. I have attached a PDF displaying all the part numbers needed. I will send you a code you can place on this if interested.

- Benny

 

[AllMoparParts.com]

Good Afternoon ~
I was wondering if you might have these specific Mopar parts in stock - or if you might know how long they will be backordered until?

6NU24TX7AB
68398209AB
68312754AC

Any information you can provide would be greatly appreciated.
Thank you & God Bless,
JD
Kansas

Hi JD,
All 3 parts are on backorder but I do not believe it will take longer than 25 days to get. Please let me know if you have any questions.
Thanks,
-Benny

 

[atxatxatx]

Hi,
There is no kit for one with rear park sensor holes similar to this https://www.allmoparparts.com/sku/82215634ab.html

You would actually have to piece everything together. I have attached a PDF displaying all the part numbers needed. I will send you a code you can place on this if interested.

- Benny

Thanks for the reponse, much appreciated.

I'm surprised that Mopar doesn't sell the version with the sensor holes as a kit

 

[JeepOfTheseus]

Do you know if it's possible to acquire the other parts that would be needed to complete the Front Disconnect Sway Bar: 68251037AC? Specifically: #14 and #16 in the parts diagram, which appears to be some kind of bracket/hangar (and do you know if that can actually be adapted to a non-Rubi model), and the actual wire harness that plugs into the actuator? FWIW, ignore the wire > switch portion, I'm simply curious about the hardware and bolting it up.

edit: looks like #14 is just the bushing retainer itself with an extra post for the hangar (#16) to attach to, doesn't appear to mount any differently.

 

[AllMoparParts.com]

Do you know if it's possible to acquire the other parts that would be needed to complete the Front Disconnect Sway Bar: 68251037AC? Specifically: #14 and #16 in the parts diagram, which appears to be some kind of bracket/hangar (and do you know if that can actually be adapted to a non-Rubi model), and the actual wire harness that plugs into the actuator? FWIW, ignore the wire > switch portion, I'm simply curious about the hardware and bolting it up.

edit: looks like #14 is just the bushing retainer itself with an extra post for the hangar (#16) to attach to, doesn't appear to mount any differently.

Hi,
Assuming we are looking at the same diagram below

#14 is part # 68260703AA
#16 is part # 68379580AB

There is a left side chassis harness that seems to differs depending on whether or not there is a front locker. I believe these options are coupled and I think the circuits are carried within it. Its noted as # 1 below.

Here are the #'s
3.6L 68397972AD
3.0L 68419304AD



- Benny

 

[Tedster]

Hi Benny,
Looking to purchase front facia bumper wiring for 2021 Gladiator Mojave with LED fog lights. Saw several different part numbers on diagrams.
Thanks

 

[AllMoparParts.com]

Hi Benny,
Looking to purchase front facia bumper wiring for 2021 Gladiator Mojave with LED fog lights. Saw several different part numbers on diagrams.
Thanks

Hi Ted,
Use # 68336461AE

Please let me know if you have any questions.
Thanks,
-Benny

 

[Dougstdig]

Can you get the Forward-Facing TrailCam?

Sponsored