Search results

My favorite ones are the EU spec tails with the amber and clear lense. If someone made those without the stupidly expensive price tag I’d be all in.

Got mine put on and I’ll echo some remarks from others. They do definitely give a bigger field of view. I like the blue tint. It definitely makes night driving much better. Driver’s side definitely has a larger impact. I wish the passenger side would have the same field of view as the driver’s...

you can do the sidetrack lights and also there’s the signals that go into the mirror cap. It started as an EU standard but then they started to implement it on certain US models.

I definitely see a difference in them. It’s not a massive amount but considering how small our mirrors are I’m not surprised. I’d say that amount that’s changed would make a big difference if you’ve got a trailer behind it. I pulled this around Saturday and I was having a hard time with watching...

What’s the issue that you’re having? I’m looking into these since I don’t have the BSM crap to worry about.

Whoa sorry for the slight derail but what hood scoops are those?

Do you have any pics to compare the sight difference between the two mirrors? The tint alone has me wanting them just curious about how much more we can see.

I’d be curious to see real differences in the viewing area because I’d like to get the blue tint ones.

So I did some testing and unplugged one of the rear led lights and now it’s working as intended. So I’m assuming that both of my lights are too much for the BCM to handle and sets a soft code. No to figure out why the 2 to 1 diode setup I’ve got isn’t letting the factory aux switch control the...

Alright so I wired this all up and this is the issue I’m getting. All I did was remove the relay from the circuit. The reverse light comes on but then blinks twice then goes off completely. Not too sure exactly what the issue is. I’m wondering if either a wire isn’t connected properly or if the...

do you have any pics of your setup?

I started with a stock exhaust. I had both resonators and the muffler removed. Then, I had dual straight pipes with black rolled tips added. Finally, I had the J-pipe installed to kill most of the drone. so the dual exhaust you didn’t buy as an aftermarket kit. You had someone make the exhaust...

Aus10dixon what exhaust system did you start with?

i was thinking the same thing. I just want to clarify they are 72w per light but being led the draw should be only 7w per light.

yeah if the circuit couldn’t handle the load I was going to go with waterproof relays but I’d just like to avoid use them if at all possible. All of my stuff gets waterproofed with tape, heat shrink, or the equivalent etc. The lights I’ve got are about 7w a piece so I’d have an extra 14w on that...

how much extra lighting can the reverse light circuit handle without causing any issues or needing to use a relay? Been having an issue with salt and relays tied into the reverse lights mounted in my bumper. I’ve got the halogen taillights currently. I know the other option is to tie into the...

Much appreciated! It’s not up to my standard but for a “test” unit I’m not gonna complain lol

So here’s a little progress on the project. I just need to run the switch wires down to the secondary fuse/relay box in the engine bay. Turned out decent I think. Might make another and make some changes to it. I’ll get some better pics when it’s daylight out.

Was doing some wiring for my factory aux switches. Then I came across this little guy on the right. I was hoping for a ground but I have a feeling I can’t be that lucky what’s it for?

My plan was to go the wolfbox route as well.