Search results

I am looking for a replacement boot for the short portion of the factory draglink. I damaged my boot and need to replace it but have not been able to find a replacement online. Any ideas? Or does anyone have a short portion of the factory drag link they would be willing to part with? Thanks

No I don't think it would, the ridges on the roof are too narrow for those suction cups. I 2nd the kuat, I have the transfer 2 bike. I got it for 280ish shipped with the locking cables from etrailer around black Friday about 2 years ago. Check out slickdeals.net and set an email notification...

I ended up adding the 3/4" teraflex spacer too. It still has a slight rake but looks so much better in my opinion. I will try to get a picture today. I did not notice any change in how it drives since adding the spacer

I went with the currie track bar that has a JJ on each end and am quite happy with it. I have replaced the tierod and drag link with synergy and the steering is quite a bit tighter. You can feel more from the road but I prefer that.

35"

they are icon rebounds with 4.5" backspacing and are 8.5" wide. If you shop you can get them for about 200 a piece

yeah, pixel decals did it for me. He had some antique bronze from another job. Really happy with it.

Nice wheels

Correct and correct. Splicing into either bed light will do what you want. That’s how mine works.

Correct.

I did not use a fuse block. I just tied into the existing wiring. Being that the draw of leds is so little and I had no intention of using the ground lights for extended periods of time I just spliced into the factory harness and soldered the connections and installed resistors to prevent the...

DON'T USE THINNER! That will eat your clear coat. Also, I just use alcohol wipes. If it is within a day or two and over 75 degrees it comes right off. But I always keep a good coat of wax or sealant on her, so perhaps thats why it comes off so easily?

well it seems that it is discontinued on some sites or substantially more money. Keep checking back I guess?

the rampage is $45 bucks and it includes a header. It is really hard to beat for the price.

I have the alien sun shade and the blueridge JLU attic.

I bought the rampage JL 4 Door California brief. https://www.rampageproducts.com/rampage-90435-california-extended-brief I bought it before I got my softtop and don't use it much now. It fits well but still has a huge gap between the door surrounds and roll bar. I have contemplated going to...

I really don't know. The tire shop ordered them from their supplier and they were there in 15 minutes. They are 19mm so I carry a 12v milwaukee impact and socket set behind the seat incase I need to change the tires.

It must be tied to the outside temp too somehow. If it's 68 outside and I have it set to 70 with an interior ambient of 75 it will blow hot air. But if I set it to 68 it will be perfect and then after 10 minutes I can set it to 70 interior and it will be comfortably blowing cool air. The...

Nice job, love the iteration. I can't wait to see what tweaks the next guy makes. Now get those hinge bolts out and take them doors off!

Yup.