Search results

I looked and they only have 19 tire options, no Mickey T's in that size, and they all look to be Load E

I think I have narrowed down what I am doing. Getting the Mickey Thompson Baja Boss AT tires, but going to 285/70R17 and 17" wheels. Discount Tire has a great deal on wheels.

Richmond VA area.

What tire pressure do you run? I am trying to figure out if I do change my wheels and tires what pressure I will need. Some of these tire pressure calculators are showing if I go from the factory 275/55R20 to a 285/70R17 the pressure should go to 26-28 PSI.

Thanks. I do keep my eyes out for newer takes offs, but I have really yet to see anything in relativley close to me in Virginia.

Yea that is my thinking too.

I have a call into the Service Manager at the dealership I bought it from just to confirm with him that adding the spacer lift won't do anything to the suspension warranty. I keep reading conflicting posts on that.

My HA has wide axles

That looks really good!

LCAs are part # 68322798AA correct?

Did you do anything in regards to a spare - or are you still using the factory spare?

Thanks everyone who responded. Appreciate the input.

Ok I’ll order the LCAs from Benny and AllMoparParts and put them in when I do the spacer lift. thanks again.

I really like that. Did you do the Teraflex 1.5 level? Assume because you are showing alignment pics that meant you needed one after you did everything. Are new LCAs really needed?

So I have decided I am going to slowly begin modding my Jeep. I have a 2022 High Altitude. For now all I want to do is get rid of the rake, and do something with tires/wheels. Not looking to break the bank so I am putting on the Teraflex 1.5 spacer kit (I may only do the 1 inch puck). My...

Took it to a Food Lion parking lot. Measured from the center of the wheel to the fender flare on both sides and the measurement was 22 and ⅞ths on each side. And from the ground to the fender flare was 38 and ⅛ th on each side. Thanks for the assist.

Did you ever figure this out? I noticed mine was the same today. Driver side rear is 1 inch lower then the passenger side. Completely stock at the moment.

I don't have the HotHeads on mine. It happens for me with the hardtops on or with my Sunrider.

And a video!