Search results

Just got back yesterday. Did a total of 18 days driving from NH and back. First stop was Medano pass and great sand dunes, then redcone, and over to Ouray for Ophir, Engineer and other connecting trails. Did rim rocker from CO to Moab, was totally worth the time. Did Gemini bridges, Fins and...

Nope sorry. I'm sure it will fit easily. My son moves his around on a hitch carrier.

Long time Grom owner here. Nearly the same bike as a monkey. Very reliable, easy to transport, easy to ride, tons of fun. If your into modding stuff (like your jeep), there is tons of stuff you can do to the monkey. My son has one that he dropped a Honda CB300 motor in along with many other mods.

Yes they did. Had to get in there with a crow bar and a block of wood to widen them back up.

I ran mine from the battery, then down along the frame, then up through a rubber plug in the backseat floor. Siliconed and gorilla taped the hole i cut in the rubber plug.

Thank you very much. Time for me to do some testing and wiring inspection. Cheers!

Got the exact same symptoms (drivers front on mine). Did all the same stuff except replace wheel hub. I have days where it will not come on, and then days where it keeps coming on. Thought I had fixed it after reseating all the fuses and canbus star connector, but it came back a couple weeks...

This was my solution. Works great, comes with everything you need, easy install, inexpensive. https://www.pecron.com/products/pecron-500w-car-charger-dc1242-500-for-car-rv-van This guy does a good video review.

A bit of a PITA. I first used a fresh blade in a utility knife to whittle the nylon bushing off, then a wire wheel to remove the remaining bits. Then I used a dremel cutting wheel, and carefully cut the metal sleeve. I did put a very minor "groove" in the metal bushing underneath, but couldn't...

Just wanted to say thank you again to @dayusmc I finished the above mod today and it definitely is the way to go. I had originally drilled out my Fox 2.5 elites to fit my Mojave and when I took my shocks off to do this mod, I couldn't believe what I found. The metal sleeves were destroyed. You...

I picked the Dynatrac. About 5K on them, no problems, rebuildable if needed.

Don't think anyone has one yet...pre-order only. My friend did pre-order one. No news on when he will get it yet. AAL makes great stuff.

Thank you sir for all you have done to figure this out and sharing it. Three cheers!

Thank you. I also have the fox 2.5 elites, but i drilled out the stock bushings. Not sure if I'm happy with how thin they are now. Are you happy with this mod? Any additional tips? Recommend?

There is a good solution for charging power stations that is relatively inexpensive and easy to install. Check out this video.

From my research/understanding, power stations that have an external power brick that draw less than 400 watts will work with the modified sine wave that the jeep outputs. Power stations that have an internal power brick require a pure sine wave regardless of the draw. Don't take this as fact...

Depending on terrain/situation, putting a colby valve in makes much more sense than try to get a spare on....quicker too.

Sending PM with VIN. Thank you.

Done. Thank you.

I'm looking for the ABS wire that goes from the connector on the firewall (below the brake booster) to the connector at the end of the ABS wire (on the frame). 2021 Mojave, drivers front.