Sponsored

115v plug in rear seat console

Pickle_Bill

Well-Known Member
First Name
Bill
Joined
Jul 20, 2021
Threads
6
Messages
123
Reaction score
125
Location
SE NH
Vehicle(s)
2021 Jeep Gladiator Mojave
Occupation
Retired
From my research/understanding, power stations that have an external power brick that draw less than 400 watts will work with the modified sine wave that the jeep outputs. Power stations that have an internal power brick require a pure sine wave regardless of the draw. Don't take this as fact, it's just what I have concluded after many hours of research to decide what power station to purchase.
Sponsored

 

WILDHOBO

Well-Known Member
First Name
Dan
Joined
Sep 24, 2021
Threads
73
Messages
11,664
Reaction score
17,736
Location
Colorado
Vehicle(s)
2021 Gladiator Rubicon
Occupation
Network Engineer
Vehicle Showcase
1
From my research/understanding, power stations that have an external power brick that draw less than 400 watts will work with the modified sine wave that the jeep outputs. Power stations that have an internal power brick require a pure sine wave regardless of the draw. Don't take this as fact, it's just what I have concluded after many hours of research to decide what power station to purchase.
Good research. Thanks. If you’re in the market, my goal zero yeti 1500 works fine.
 

ShadowsPapa

Well-Known Member
First Name
Bill
Joined
Oct 12, 2019
Threads
247
Messages
40,442
Reaction score
53,859
Location
Runnells, Iowa
Vehicle(s)
'25 JTMX, '23 JLU 4xe, '82 SX4, '73 Javelin
Occupation
Retired auto mechanic, frmr gov't ntwrk security admin
Vehicle Showcase
3
Power stations that have an internal power brick require a pure sine wave regardless of the draw.
Shouldn't require pure sine wave - very little actually does these days, especially power supplies that step down the power and rectify it for storage in a battery. (power brick is outside - internal is likely on a PCB)
There's really little reason for there to be a difference in which waveform they'll handle. They store power in a battery and step it up or down as required for the various ports.
 

Pickle_Bill

Well-Known Member
First Name
Bill
Joined
Jul 20, 2021
Threads
6
Messages
123
Reaction score
125
Location
SE NH
Vehicle(s)
2021 Jeep Gladiator Mojave
Occupation
Retired
There is a good solution for charging power stations that is relatively inexpensive and easy to install. Check out this video.

 

hakoda

Active Member
Joined
Mar 1, 2022
Threads
3
Messages
31
Reaction score
26
Location
SoCal
Vehicle(s)
2022 Gladiator Sport S MaxTow
Whether the powerstation's charger agrees with MSW depends on the vendor really. Some deal ok some don't. There are plenty of threads, examples, and videos that show it.

~5:38
 

Sponsored

Dunks001

Well-Known Member
First Name
Duncan
Joined
May 29, 2021
Threads
17
Messages
79
Reaction score
57
Location
Austin,TX
Vehicle(s)
KTM 790R
Occupation
Funemployed
Power stations that have an internal power brick require a pure sine wave regardless of the draw.
Thx for this. I’ve run into this issue with a Anker C1000 solar generator.
Searching for a fix now. What solutions have people found?
 

Pickle_Bill

Well-Known Member
First Name
Bill
Joined
Jul 20, 2021
Threads
6
Messages
123
Reaction score
125
Location
SE NH
Vehicle(s)
2021 Jeep Gladiator Mojave
Occupation
Retired
 







Top