Search results

removable cupholder liner so that it can be easily cleaned. and don't need the lights in the cupholders.

Where did you tap in for the ignition sensing wire?

That's not how mine works. Get in and it's over 100 inside. It still stops the motor at the first stop sign. The AC has only just started to chill down much less the cab.

Not true. It still shuts off with the AC on. Very annoying in 95+ degrees. :mad:

The choice really depends on the type of terrain you will be covering. For sand and mud the recovery boards make a lot of sense for self-recovery. For rocks and hill climbing a winch is a better choice for self-recovery. And of course, as already stated, a snatch strap only works when you...

What a poseur. They don't even have any pioneer tools attached (shovel, mattock, and axe, for you neophytes out there).

Mine started working after a uconnect update in February. Or just move to a higher altitude.

I am installing the redarc today, which I ordered last week. Available. No changes needed (except ABS TSB for early trucks). And the redarc actually has both on-road and off-road modes.

No. The weight of the canopy is transferred to the rails instead of the bed caps. If you don't have trail rails, you can get Mopar or BuiltRight rail kits.

My lift is a RockKrawler 3" Pro-x with 37" BFG KM3's on Method 703 wheels.

There is a reason that the Alucab canopy thread is shorter than the RSI canopy thread. The Alucab is better built, puts the load on the trail rails using shims/brackets instead of the on the bed caps using c-clamps, is one piece aluminum and light weight. The gasket under the canopy simply...

I had the same problem after diff ran hot due to summertime and heavy loads. Because I have regeared a new diff wasn't an option and I have about 10K on the new gears. I pulled the cover, inspected the gears and changed the fluid and the problem hasn't come back. Yet. I have the Z Locker...

I think the same thing. I haven't had any more lights since I changed the fluid. Lot less expensive than changing the rear-end.

redline tuning struts and a shop towel on the windshield when I put the hood all the way back.

https://www.autoevolution.com/news/tornado-straight-six-engine-rumored-to-debut-in-the-2022-jeep-grand-cherokee-164036.html And the original Gladiator trucks came with the Tornado OHC engine.

Rear locker sensor was acting up on my JT, so I pulled cover, cleaned everything and refilled with fresh gear fluid. Problem hasn't come back. Nothing unusual from the inspection. I have 5.13 gears so I wasn't going to the dealer to address the problem. I now have the z auto harness to...

Sold

The IBS is needed for the "smart" alternators. Wish there was a std alternator that could replace the oem version. Is your new alternator a smart alternator?

I seem to remember making a couple of holes larger because metric vs sae. otherwise no fitment issues. Also, I think they want to know if your winch mounting is centered or offset.

great products, great quality, great service. Powder coating is excellent. Packing for the bumper was excellent. I didn't have any issues with fitment. I have purchased rockers and bumpers from them.