Search results

Cant you route the water back to itself in the cooler side but bypass the oil around the cooler using the two plugs on the bottom to route the oil lines

not sure where you mean, plastic molding?

These came with 4 of the metal clips, i put two on each rear vent, seemingly the directions show one clip 3" in from the ends. was i supposed to put clips in the front ones? i need more clips i guess

Ok, they are in the channel just to the outside of the window channel, so where else would they go? The next channel past that is the actual fold in the weather-strip and it wont go in there.....

These stupid things are in channel....i was hesitant in buying these things. But ive had good luck w weather tech in the past. I have no good idea on how to keep them in. Soon as the window comes down they are right behind it.

Ok, i bought into the advertising. Bought the front and rear window vent covers. Followed the directions, let em sit, for 48 hrs. Hell i left em for 3 full days. Went to put rhem down today after work and both fronts came right out. Man im pissed, that was $100 for nothing. Anybody else deal...

Need to bypass the coolant to oil filter, either a plate or plug the coolant side

It says 2018-2020 models, Im assuming the rad stayed the same up through the 2022 models. I would be interested myself. Look forward to your results posted up

Mine is diesel, and I use the Pennzoil, even though I was never a big fan of Pennzoil, but it has the rating and says full syn. Filters I try to use Mopar products, but WIX gold, AMSOIL, and some others have good filters that probably mimic or are better than stock

add 500 more lbs and lets see what you can do, lol

Come on man, big bore stroked WGlide w 135hp cannot be out run by a hopped up Sporty

WTF....?

That cardan joint can bind at severe angles too. On my mud truck w 8" of lift and 44's i had to relieve some areas where you could see marks where it was hitting

Nitto Trail Graps, 35 x 11.5R17 and get er done....no rubbing and less rocks on the side of the vehicle

Feel your pain, very similar situation on my end

You can easily plumb a check valve into the system. Inlet or outlet, and you can get them with AN fittings or capable

Thanks Choatecav, appreciate the insight. Using fishing line is a great tip, Ive used it before on unwanted reflectors and such, actually forgot about it. You mentioned the cleaning, but waxing too? The wax didn't affect the adhesive on the new letters? Thanks again

One thing for sure, those tires are LIGHT, 35lbs for a 35 x 12.5??

I did the muffler delete, and theres room in that area to install a cooler without problems. If you hit it up that high (just under the bed floor) then you will have a bunch of other things to worry about

Im thinkin you would need at least the four tube model.