help

Hey all im brand new to the jeep world and im already in love. I have a 22 Jeep Gladiator Willys. I need help deciding what are the better choices on some accessories/mods to get. Here is what I'm looking at and not sure what's better per the experienced people have found. Here what im looking...

i have a 2024 jeep Mojave with a overlanding rig in the back. I'm experiencing sone squatty ness and need new rear springs, but i decided to go ahead and just lift it anyway since ill be spending the money. I'm looking at the meatal cloak 2.5 game changer but its a lot and I'm not sure if its...

Hey everyone! I was able to purchase my first Jeep last week. I had been eyeing the Gladiator Rubicons for the last few years, and I was finally able to pull the trigger. We were able to take it out on some trails last weekend and we had a blast. I’m looking for advice on what upgrades I...

Hey guys! New here but I need some help. Ive been scouring the markets for months now trying to find a great deal on used MANUAL Mojaves, 22 and newer. Ive finally honed in and located 2 both equally far away (5 hours) and need help choosing. For starters, both vehicles are black mojaves in...

Hey everybody, I was wondering if anybody has wired the harbor freight edge road lights (4"pods) up to the factory AUX switch? I'm trying to figure out how to utilize the wiring harness that is specific for these lights since I bought it already. The lights are pulse modulating is my issue. They...

Hi, I have the mopar twill soft top for my 2021 gladiator and while it opens fine, it won't close without manually pushing the "lift support strut" (68398990AA) in. It's difficult to do since it needs to be done on both sides and I'm wondering if anyone has found a fix for this other than...

Good afternoon JT Jeeple, Please don't roast me as I've already tried searching for this info... I just picked up a Rubicon TakeOff suspension from a '23 JTR with the Red Shocks. I've read in several places that they actually exceed the Fox shocks. Time will tell. So my query is: I have...

Anyone have any recommendations on what to use these light mounts for. I've already got plenty of lighting.

Hi everyone. So I recently bought a Sport S about 3 weeks ago with 20k miles on it. Already has Mopar 2" lift and 35" tires. I've already ordered gears and they are being installed later this month as the stock 3.73s are just driving me crazy on the highway. I live in NC and plan to take it to...

I NEED HELLLPPPP! I took apart my front grill to paint it and for the life of me cannot figure out how to put it back together. Where do all the little pieces go?

When I put my transfer case in 4L it drives like it’s still in 4H, and when I try to lock axles it says “to lock axles shift to 4L” Currently out in sand hollow (Hurricane UT) from California. Anyone had same issue and have a solve? Obviously I’ve tried shifting through the transfer case and...

Trying to identify the bolt in the first picture, with the green background. It goes from the rear upper swaybar endlink to a welded nut/bracket on the body/frame of the truck. My 2 local dealerships can not identify it, they have a glitch in there computer system that needs to be updated. The...

Well folks, I think it’s time for me to regear from my 4.10 to either 4.88 or 5.13. The question I have is which gear ratio would y’all recommend & what brand? Also, another question I have is how much did y’all pay for it to be done? Or did y’all do it yourselves? A little about my truck...

Hey guys, I have a question about a bulge on the front springs isolators after installed a 1.5" teraflex leveling kit on my Jeep Gladiator Overland 2020. I notice the spring isolator have some bulge that is not even around the isolator, the coil spring is correctly installed, I don't know why...

I've got a 2021 Mojave that I had the dealer install lift/parts on yesterday. They installed: 1) AEV 2" spacer lift for Mojave 2) Front/Rear Core4x4 adjustable Track bars 3) AEV Geometry correction brackets 4) Front Lower control arm 5) Rear Lower control arm 6) Teraflex rear track bar...

I am ordering an Overland in April and I am looking to you all for your knowledge and advice! So here is some starting info, so lets go from there. Any info helps. I am wanting to build a 6-speed Overland @ ~49k MSRP (build added below) 40k down payment. I work for a company in the FCA...

So I'm putting the memory card back in my dash cam and it pops out, bounces on the dash and dropped down the heater vent! I can get another card, but do I need to be concerned with damage to a fan or anything. I can't find a good diagram as to where that vent goes and definitely not tearing the...

Has anyone installed a BuiltRight Utility Rail on top of a drop in bedliner? If yes, could you share some pics of how you did it? I am trying to see if I need to completely cut out where the rails would go so it would be metal on metal the whole way or just small cut outs where the bolts go...

Hi Folks, I recently put on a set of Toyo Open Country ATIII's 35x11.50r17's on my JT Rubicon. Driving around town I've had no problems. Went to work, noticed a slight shimmy on my way to work but I brushed it off. Went on a longer highway drive and I noticed around 55-60 that my steering...

So this is my first post although I have been reading these articles for a while now. I bought a 3 piece steel bumper and couldn't be happier with the thickness and quality. I will admit that I bought the one from eBay. It came completely put together with some additional parts that for...