2025 jeep gladiator nighthawk upgrade to LED

[ecidiego]

how many wires are in the headlight connector on the wiring harness side take a pic if you can

Sponsored

 

[vrichards1616]

how many wires are in the headlight connector on the wiring harness side take a pic if you can

This is outside my realm unfortunately. I would have to go back to the people that installed it. But when I called to ask before they claim 4

 

[ecidiego]

This is outside my realm unfortunately. I would have to go back to the people that installed it. But when I called to ask before they claim 4

"Signature Lamps or Mirror Repeater Present - Pin A5 & Pin A7 (Halo)" setting, and the "Signature Light Present Present On/Off"

 

[vrichards1616]

"Signature Lamps or Mirror Repeater Present - Pin A5 & Pin A7 (Halo)" setting, and the "Signature Light Present Present On/Off"

correct. I did those two settings. Made the one active and the other as signature lamp. Would the grill lights affect it? A different Jeep accessories company installed those separately way beforehand. Those come on when the car turns on and with the ACC

 

[vrichards1616]

"Signature Lamps or Mirror Repeater Present - Pin A5 & Pin A7 (Halo)" setting, and the "Signature Light Present Present On/Off"

Any ideas?

 

[ecidiego]

Any ideas?

If the settings applied in the BCM and the 4th wire is connected, no. I'd have to look at it.

 

[vrichards1616]

If the settings applied in the BCM and the 4th wire is connected, no. I'd have to look at it.

I will take one last look tonight. If all else fails, I might have to go back to who installed it and have them double check what wires connected where for that. They already told me they don’t tazer.

As for the dealership, the only code they could apply is LPX and not LPY. Does LPY control the halos by chance? LPY was just the turn signals.

 

[ecidiego]

I will take one last look tonight. If all else fails, I might have to go back to who installed it and have them double check what wires connected where for that. They already told me they don’t tazer.

As for the dealership, the only code they could apply is LPX and not LPY. Does LPY control the halos by chance? LPY was just the turn signals.

LPY can't be applied as your truck doesn't have the correct body side harness. I covered this earlier.

 

[vrichards1616]

LPY can't be applied as your truck doesn't have the correct body side harness. I covered this earlier.

Right. So does LPY control the halos? The would be why the halos don’t work

 

[ecidiego]

Right. So does LPY control the halos? The would be why the halos don’t work

No. LBQ is Halo. It really doesn't matter though because you turned the correct options on with jscan

 

[vrichards1616]

No. LBQ is Halo. It really doesn't matter though because you turned the correct options on with jscan

Dealership even confirmed LBQ was flashed for halos. I attempted all settings again. No luck. I gave up

 

[ecidiego]

I can't recall, but there may be a setting in Uconnect. Look in there for a DRL option. Also - they will only come on in Drive, or if the parking lamps are turned on I think. Settings ---> Lights

 

[vrichards1616]

I can't recall, but there may be a setting in Uconnect. Look in there for a DRL option. Also - they will only come on in Drive, or if the parking lamps are turned on I think. Settings ---> Lights

Yes I made sure to put the car in drive and off park each time I messed with a setting…I will look at the uconnect settings, but DRL should already be selected for and only turns on or off the LED fenders

 

[Texbaz]

do you have a list of your configuration.I think this is what I used when I went from Halogen to LED W/halo enabled 2023 Mojave

 

[vrichards1616]

do you have a list of your configuration.I think this is what I used when I went from Halogen to LED W/halo enabled 2023 Mojave

I only have the jscan but I have all of those settings except the Quad headlamps enable. What’s Quad?

Sponsored