A-Pillar KC or?

[Sw00per]

Thanks brother ??

Sponsored

 

[AstroZombie]

https://www.amazon.com/gp/product/B00IY3YLCI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0CCJJ5RN3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

I got this 2 years ago. They work great. At teh time i spend less than $100. They really open up the field of view. Great when i was in Colorado and helped me see if Elk or Deer were grazing the side of the road.

 

[Willpower1]

I like my Mopar lights and brackets. Have had them for 3 years. They’ve held up well and give good light.

 

[DJeepDMD]

I have been very happy with these.

Which PIAA a-pillar lights and mounts are those?

 

[Arisdocjk]

Got them on amazon

 

[DJeepDMD]

Got them on amazon

Awesome, thank you! Know if light covers are available for these?

 

[Arisdocjk]

I don’t know. The rock guards that come installed seem to work good. Two trips from Louisiana to Colorado with no damage

 

[MPMB]

https://www.amazon.com/gp/product/B00IY3YLCI/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0CCJJ5RN3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

I got this 2 years ago. They work great. At teh time i spend less than $100. They really open up the field of view. Great when i was in Colorado and helped me see if Elk or Deer were grazing the side of the road.

I have almost that same setup, including the mounts. I have those lights, but I'm not sure they're mounted or sitting in a bin somewhere. I need to re-aim them tho.

I have a crazy idea kicking around in my head, but it depends on how much clearance I'll have to get in the garage.

 

[AstroZombie]

I have almost that same setup, including the mounts. I have those lights, but I'm not sure they're mounted or sitting in a bin somewhere. I need to re-aim them tho.

I have a crazy idea kicking around in my head, but it depends on how much clearance I'll have to get in the garage.

I had to shim teh mounting bracket with washers to raise it up enough so light mounting bolt doesn't hit the cowl. No issues. I even hit the car wash couple times a month (Soapy Joe's) hasn't affected teh lights or the mounts ever.

 

[MMMojave]

MLight mounts on mine. Easy install amd lights have severa different settings with its one harness and switches.

 

[DJeepDMD]

I don’t know. The rock guards that come installed seem to work good. Two trips from Louisiana to Colorado with no damage

Which Aux switch did you connect to? Also, called PIAA, they said 85watt per light, second call to PIAA said 7watt per light. Cover of box says 14w. How did you determine the amp draw?

 

[portalgun]

I have the same winch and bumper and was looking to do the same lights you have on there but was worried about the winch locking handle being blocked from going into the open position by the lights there. Plenty of room you’ve found I take it? Do you have a picture from the top down you could post of it?

thanks!!!

 

[Arisdocjk]

Which Aux switch did you connect to? Also, called PIAA, they said 85watt per light, second call to PIAA said 7watt per light. Cover of box says 14w. How did you determine the amp draw?

I used aux 4. No problems so far.

 

[Griff21]

No issues whatsoever, the winch is the VR EVO 12k

 

[Bobchadwickga]

Two sets of KC lights installed. Spots on the A-Pillar with wider lights on the bull bar. Combined with the factory lights there is a ton of illumination in front of the truck

Sponsored