Adding a rear tow hook.

[Freems]

Reviving this. I picked up a spare tow hook and bolts on FB Marketplace. Since puling the bumper seems to be pretty easy, I'm going to pull the bumper and use the metal window opening on the back side of the bumper as a template for the opening. I'll drill 4 holes in each corner about the same size as the window corner radii. Then, using the metal window as a guide, use a utility knife to score through the plastic. Should result in a nice clean opening.

If this fails I can always buy a new bezel with the cut out and go through the process of pulling the bumper

the right tool for the job….HF $

24.99

Sponsored

 

[kilroy173]

I did this mod and while it was a pain in the a** i was able to get it done without breaking anything and it looks clean and factory.

 

[Reddout99]

I have one of those!

 

[Reddout99]

I did this mod and while it was a pain in the a** i was able to get it done without breaking anything and it looks clean and factory.

That'll be my option if I don't like how mine turn out

 

[kilroy173]

If all else fails you can buy a used take off mojave or rubicon rear bumper. Ive seen them for dirt cheap.

 

[whiteglad]

I put an aftermarket rear bumper on my Mojave so have the factory bumper and tow hooks "in the shed."

 

[Gizmo]

I bought the kit a year ago for my sport s and it fit fine. It was not easy but researched the process well before hand

Sponsored