Anyone tap into this bed area ?

[Angler3]

I was wondering if this area is safe to use a nut sert. Thinking about putting a removable flag holder there.

Sponsored

 

[Minty JL]

Yes, I have

7/16" drill bit to install M8 rivnuts

 

[Angler3]

I was wondering if this area is safe to use a nut sert. Thinking about putting a removable flag holder there.
View attachment 317878

Yes, I have

7/16" drill bit to install M8 rivnuts

awesome!!! Thanks a million ! Exactly what I want to do

 

[Angler3]

Yes, I have

7/16" drill bit to install M8 rivnuts

Do you have a parts list , took a closer look and I really like the set up

 

[Minty JL]

Do you have a parts list , took a closer look and I really like the set up

I can get a part list persae, but this was off from my JLUR and modified to work for my JTM

Here is what I started with and worked off from this:

https://www.amazon.com/gp/product/B07XFL1NX2/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

 

[SargeDiesel]

Do you have a parts list , took a closer look and I really like the set up

Here is basically what he has in a kit ready to go, without any extras.:
https://www.roughcountry.com/univer...7867423678|&utm_content=&utm_term=||m||117501

 

[Angler3]

Here is basically what he has in a kit ready to go, without any extras.:
https://www.roughcountry.com/univer...7867423678|&utm_content=&utm_term=||m||117501

Thanks for the info

 

[NvrGvUp]

Yes, I have

7/16" drill bit to install M8 rivnuts

Very nice! Using the M8 rivnuts is always a simple way to fasten things to body panels. If you want to ensure strength of the hardware for accessories you might consider measuring the distance between the holes and drill and tap a piece of flat metal with the same distance between the holes. Add the taped flatbar inside the body panel.

Sponsored