Fisherob
New Member
- First Name
- Robert
- Joined
- Sep 3, 2026
- Threads
- 1
- Messages
- 1
- Reaction score
- 0
- Location
- United STATES
- Vehicle(s)
- 2025 Jeep Gladiator
- Thread starter
- #1
Need Help! I have a 2025 Jeep Gladiator. I installed after market dash and Knee speakers. In the dash I have Kicker KSC350 I purchased from Trail Seven. I also installed The JP6 knee speaker pods from DS18. I am noticing a volume drop on the right channel. If I play a Mono 1Khz test tone at a low volume and front fade to the right it will go away but if I turn it up its fine. I installed a PAC module and tested the Left and Right front outputs and definetly there are voltage differences. 3:1 in fact. I have the factory premium system with amplifier. I didn't notice the sound loss on the stock speakers but was really noticeable on the after market speakers. What am I missing. My plan is to add an after market amp and my amp has a gain for channel 1/2 and a Gain for channel 3/4. I am unable to successfuly set gain as I set it on the left speaker with perfect sine and the right it becomes smaller. If I set the right channel to a perfect sine wave the Left is distorted. I'm missing something here and its racki g my brain. Any ideas?
Sponsored