Bed Storage - Ryobi Link Boxes Fit Perfectly

[RubiNewbCB]

As a home owner/DIYer, I like Ryobi for affordability and reliability. If I were a professional contractor I'd probably have Milwaukee tools and packouts. I went with HF Bauer for the boxes for cost savings and sales prices. They fit well under the Bak Revolver X4s, now they fit even better under the OVS Expedition Canopy. I even went and grabbed the roller box now for a Chuckbox, since before it was too tall.

Sponsored

 

[Reddout99]

Guys,

Totally off-topic, but what tonneau cover are you running? Thanks

 

[FloridaAussie]

As a home owner/DIYer, I like Ryobi for affordability and reliability. If I were a professional contractor I'd probably have Milwaukee tools and packouts. I went with HF Bauer for the boxes for cost savings and sales prices. They fit well under the Bak Revolver X4s, now they fit even better under the OVS Expedition Canopy. I even went and grabbed the roller box now for a Chuckbox, since before it was too tall.

Hey I like the bed rug. How does it go with respect to trapping water underneath?

I also like what you did with your wooden divider. I did something similar, though not as radical, to reduce the weight.

 

[Scoob]

Totally off-topic, but what tonneau cover are you running? Thanks

Reddout99, I am running the BAK Revolver. Ive had many covers but so far this has been my favorite.

 

[Reddout99]

Reddout99, I am running the BAK Revolver. Ive had many covers but so far this has been my favorite.

Thanks

 

[Macbrun]

Reddout99, I am running the BAK Revolver. Ive had many covers but so far this has been my favorite.

Had the same on my Titan and loved it. Once I have my Gladiator, by the end of this year, it's getting the Revolver as well.

 

[RubiNewbCB]

Hey I like the bed rug. How does it go with respect to trapping water underneath?

I also like what you did with your wooden divider. I did something similar, though not as radical, to reduce the weight.

Minimal issues with water, the Bak Revolver leaked quite a bit. Even with extra seals for the bed. But the rug absorb the water and it dries out rather quickly. My bed is pristine under the rug and I've had the rug as long as I've had the truck.

My Bak Revolver tonneau was only two years old and started delaminating, the vinyl was separating from the aluminum like the original Revolver. It was starting right near the locking mechanism and was difficult to close sometimes. Frustrating. So I went with a canopy.

The board was a pressure Treat 2x8 that I ripped down and then lightened up, plus I can haul some longer items and trap then in the openings and the tie them down if the gate is down.

 

[FloridaAussie]

The board was a pressure Treat 2x8 that I ripped down and then lightened up, pause I can haul some longer items and trap then in the openings and the tie them down if the gate is down.

I have Tyger brand roll up tonneau that is well 2 years old now and is holding up very well indeed. It was only $200, and I had one before on another truck I owned.

That's genius about the wood. I made holes everywhere that could accommodate my hands; make it easier to pick up. You've inspired me to modify them further, since I often get 2 x 4s from the store. I was gonna burn the word "GladHeAteHer" into it with a hot poker, as well.

 

[Slojo]

Those Ryobi boxes worked well in my Decked Drawer system as well.

 

[RubiNewbCB]

Also, 4 milk crates will fit perfectly between the Gladdy board and tailgate. Simple inexpensive solution.

 

[Malachi23]

It's always good to have options and that looks like they fit in there very nicely.
I'm another Harbor Freight storage guy as well. I use one of the rifle cases for recovery items and the boxes/crates for my air compressor, bottle jack, and whatever else needs to come along for the trip. I use a ratcheting cargo strap to keep things from sliding around.
I also appreciate how they all can stack together, so it doesn't take up a bunch of space in my garage.

@Billyj7175, what did you use to get that white rotopax mounted?

 

[Billyj7175]

I used the MetalCloak Molle bed panels. I didn't get the front panel though, just both sides.

Sponsored