Calling all Dirty Harry’s

[TrlRnr]

I need to double (triple/quadruple) check my choice of offset for a set of KMC Dirty Harry wheels for my ‘22 Mojave.
I’ll have the AEV 2” lift and will run BFG KO2’s 37”.
Which offset to maintain as close to factory poke as possible?
For anyone who already owns this wheel, what did you go with?
Pics are a bonus!! Thank you!!

Sponsored

 

[Not2Late]

I need to double (triple/quadruple) check my choice of offset for a set of KMC Dirty Harry wheels for my ‘22 Mojave.
I’ll have the AEV 2” lift and will run BFG KO2’s 37”.
Which offset to maintain as close to factory poke as possible?
For anyone who already owns this wheel, what did you go with?
Pics are a bonus!! Thank you!!

Try this tool if you haven't already: https://tiresize.com/wheel-offset-calculator/

It's been mentioned on this forum before and it helped reassure me! I believe the offset on the factory Mojave wheels is +37mm (+44mm for Rubicon wheels).

 

[22_Sarge_Sport]

I don't have anything to add except for my opinion that those wheels are terrific.

 

[CGilly6]

AEV 2” lift
KMC Dirty Harry 0 offset
37x13.5x20

beyond happy

 

[Sarge502]

Looks great man can’t wait to order mine. Things keep Getting in the way

 

[Escape.idiocracy]

I need to double (triple/quadruple) check my choice of offset for a set of KMC Dirty Harry wheels for my ‘22 Mojave.
I’ll have the AEV 2” lift and will run BFG KO2’s 37”.
Which offset to maintain as close to factory poke as possible?
For anyone who already owns this wheel, what did you go with?
Pics are a bonus!! Thank you!!

17’s come in:
17x8.5 0
17x9 -12mm
17x8.5 +18mm

Or the 20” variant (personally wouldn’t run a 20” wheel unless it were going on 40” or 42” tires….)
20x9 0mm

factory is 17x7.5 +44

17x8.5 +18mm is the “closest” to factory poke.

https://www.wheel-size.com/calc/?wh...-17X8.5ET18&fcl=50mm&wcl=30mm&scl=50mm&sr=0mm

In my opinion this is a better visual for wheel poke…. Doesn’t work so much for the size tires…..

 

[Sarge502]

Welp those of you with this wheel be glad you have them. Unfortunately start of 2023 they've now discontinued this wheel for good in all sizes. Just got off the phone with them. Not sure why either. I'm super pissed.

Due to wanting them in 18s (more expensive) also the fact of buying 5 (prefer matching spares) and other financial obligations, I wasn't able to pull the trigger on these before they decided to stop making them.

There's literally no other wheel that I liked as much. So back to square one for me.

 

[TrlRnr]

I’m really sorry about that, Sarge. That’s kind of a bummer for me, too, because I was thinking of going bigger this summer.
My second choice after the KMCs were the AEV Savegre II wheels. They’re similar. A 5 shot Derringer vs. a S&W .44 magnum??

 

[Sarge502]

I’m really sorry about that, Sarge. That’s kind of a bummer for me, too, because I was thinking of going bigger this summer.
My second choice after the KMCs were the AEV Savegre II wheels. They’re similar. A 5 shot Derringer vs. a S&W .44 magnum??

Yeah they are kinda similar lol. I'm going with the AEV lift eventually (assuming that doesn't get discontinued too lol). Not as similar but I actually like the AEV Borah wheel too. Only thing is AEV only makes 17s. Wanting and needing 18s have made this way harder for me. But considering I have stock Overland 18s but upgraded to 35s on them that are practically brand new, I'd rather stick to 18s than buy new tires again when I barely have 10k on these.

Only other wheels I like half as much than the Dirty Harry’s are the Fuel Zephyrs and Black Rhino Overland, but even those come slightly wider than the 18x8.5 that I preferred on the Dirty Harrys. Rather not stretch my 35s wider than I'd need to.

 

[CraigP]

I know this is an older thread but just put dirty harrys on my 21 sport s max tow with 35 bfg ko2s. I went 17s and zero offset. I also have a 3.5" rough country lift.

Sponsored