cargo storage?

[satfico]

Any suggestions for cargo management? I do not want to spend for the bed storage system. Looking for something That can keep stuff from zipping around in the bed.

Sponsored

 

[Commodus]

Any suggestions for cargo management? I do not want to spend for the bed storage system. Looking for something That can keep stuff from zipping around in the bed.

2X4 cut to size

 

[Mr._Bill]

Any suggestions for cargo management? I do not want to spend for the bed storage system. Looking for something That can keep stuff from zipping around in the bed.

There are tie downs in each corner. The Trail Rails provide additional tie down points. There are numerous cargo carriers and various containers that can be placed in the back of the truck. There is cargo netting to hold things in place. A tonneau cover will keep it contained while driving. The RSI Smart Cap offers additional options. I put a deposit on one, to replace the tonneau cover. It should be available in October.

 

[satfico]

2X4 cut to size

Couldn't tell if you were helping or wise cracking.

 

[Mr._Bill]

Couldn't tell if you were helping or wise cracking.

It's in the Owner's Manual. There are a couple slots in the bed to place cut 2x4's.

 

[mx5red]

I actually like this, it collapses down and buckled tight. You can open up however many compartments you need. The end ones are slightly insulated/reflective for keeping stuff a little cold on the way home. Even comes with straps to secure it in the bed.
I usually keep it collapsed and buckled, quick to open when you need it.

 

[Murgatroid]

I've heard two of these fit perfect, https://smile.amazon.com/dp/B073ZGH...olid=1Y9LHRUTE9S2V&psc=1&ref_=lv_ov_lig_dp_it

 

[Michael@WeGo4WhlLow]

My solution and cheap!!! Stickers add 1" of lift.... LOL....

 

[satfico]

I actually like this, it collapses down and buckled tight. You can open up however many compartments you need. The end ones are slightly insulated/reflective for keeping stuff a little cold on the way home. Even comes with straps to secure it in the bed.
I usually keep it collapsed and buckled, quick to open when you need it.

Thanks, that is what i was referring to when i posted.

 

[satfico]

I've heard two of these fit perfect, https://smile.amazon.com/dp/B073ZGH...olid=1Y9LHRUTE9S2V&psc=1&ref_=lv_ov_lig_dp_it

Thanks for the suggestion

 

[mojocho]

There's a thread on here for truck bed boxes. Lowes and TSC has several options.

The 2x4 option is my current method as well... Until I find something permanent. ACE engineering just started selling a really nice aluminum bed extender

Many folks combine inexpensive rubber containers with their tonneau covers.

 

[mx5red]

I also bought some boxes at Home Depot

 

[zprovo]

I have a 2x4 cut to length, 2 plano 1919 trunks and a rubber bedmat from amazon. That combination has worked well for me, and less than $200.

 

[satfico]

Can I see a photo of the 2x4’s?

 

[zprovo]

I cut mine a little short so I stapled a rag to the ends to stop them shifting around. Not necessary if measure twice and cut once...

Sponsored