muttinthehut
Member
- Thread starter
- #1
I thought I'd share my experience installing the Draw-Title Class III hitch and a Reese Steadi-Flex WDH for towing my RV. Both were incredibly easy, with the worst part finding the necessary torque wrenches and drivers.
The Draw-Title mounts over the existing hitch. Simply remove the four factory bolts, hold up the hitch, and insert the two supplied bolts. Literally took less than an hour to install by myself. It would be a 30min install if you have some assistance. I installed the Draw-Title iCommand brake controller using a Tekonsha Wiring Adapter. My Overland has a 1/2020 build date and the wiring was plug-n-play and worked right out of the gate. The hardest part was finding the existing open connector buried under the kickpanel. The Reese Steadi-Flex was a little more involved. The install was very easy, no drilling is required for it. But the adjustment on the A-frame brackets, bars and ball angle required several iterations for proper leveling and weight distribution. It was not difficult at all but was a little time consuming to get it right.
My RV is 24' and our maiden voyage went smoothly. Appreciate the info others have posted here and couldn't have gotten it done without it, so wanted to say thanks and share my results.
The Draw-Title mounts over the existing hitch. Simply remove the four factory bolts, hold up the hitch, and insert the two supplied bolts. Literally took less than an hour to install by myself. It would be a 30min install if you have some assistance. I installed the Draw-Title iCommand brake controller using a Tekonsha Wiring Adapter. My Overland has a 1/2020 build date and the wiring was plug-n-play and worked right out of the gate. The hardest part was finding the existing open connector buried under the kickpanel. The Reese Steadi-Flex was a little more involved. The install was very easy, no drilling is required for it. But the adjustment on the A-frame brackets, bars and ball angle required several iterations for proper leveling and weight distribution. It was not difficult at all but was a little time consuming to get it right.
My RV is 24' and our maiden voyage went smoothly. Appreciate the info others have posted here and couldn't have gotten it done without it, so wanted to say thanks and share my results.
Sponsored
