Gametech
New Member
When the turn light comes on with a jl tazer the red brake light goes out. I just took a wire from the chmsl and ran it to the brake light wire and tapped in I did use a couple diodes to keep the current from going back to the bcm just to be safe I did not use any wire diagram from anyone just good ole trial and error.Hmm. can you explain what you mean by "tapping off the chmsl for the brake light that goes out"?
Have you used the wiring and programming described by the JScan guys - http://jscan.net/jeep-wrangler-jl-light-conversion-us-eu-specification/?
Thx a ton
Sponsored