Best and easiest way to get the Gladiator over 300hp?

[DylanR]

What would be the easiest way to increase the horsepower to over 300hp... just sounds better. Lol

Exhaust + cold air intake?

Go!

Sponsored

 

[Rex3rd]

What would be the easiest way to increase the horsepower to over 300hp... just sounds better. Lol

Exhaust + cold air intake?

Go!

From what I've seen on here there's really not much hp you can push out of these engines. You could turbo but it will blow up pretty quick supposedly . Cold air intake does nothing to the numbers and exhaust won't push much either. Putting in a hemi or something of that nature v8 wize would be the best easiest option but not the cheapest. Maybe some one else can chime in that's tried to mod there engine

 

[Sorbs]

What would be the easiest way to increase the horsepower to over 300hp... just sounds better. Lol

Exhaust + cold air intake?

Go!

https://superchips.com/shop/pulsar-2020-jeep-3-6l-jt-gladiator

 

[Renegade]

Supercharger! Edelbrock should have theirs out soon. That’s the brand I would trust.

 

[JP1]

https://superchips.com/shop/pulsar-2020-jeep-3-6l-jt-gladiator

+1.
I will say, if you are in STOCK or ECON and hit the button to TOW or PERFORMANCE, you will feel it.
I know someone earlier said it didn't make much difference, but then saw he had a manual.
On my 8-speed Auto with 37s, you DO feel it.

 

[jjmstang]

I suppose the Superchips leave a "Footprint" in the ECU ?

 

[Sorbs]

I suppose the Superchips leave a "Footprint" in the ECU ?

Nope, it doesn’t mess with the software on the ECU. It is a piggyback unit.

 

[jjmstang]

Nope, it doesn’t mess with the software on the ECU. It is a piggyback unit.

Okay thank you

 

[DylanR]

Will an exhaust void any type of warranty or throw a code?

 

[jjmstang]

Will an exhaust void any type of warranty or throw a code?

As long as you retain the catalytic convertor, you should be good to go

 

[DylanR]

As long as you retain the catalytic convertor, you should be good to go

So if I ordered a magnaflow or Gibson full exhaust that would be ok?

How do I retain that convertor? Dumb question I know... I have had the muffler shop install exhaust several times but never on one of my new trucks... thanks for the help!

 

[Sorbs]

So if I ordered a magnaflow or Gibson full exhaust that would be ok?

How do I retain that convertor? Dumb question I know... I have had the muffler shop install exhaust several times but never on one of my new trucks... thanks for the help!

These are “cat-back” systems and no, these will not impact warranty. Also, if you want to save $$$, just have a muffler shop eliminate your “suitcase baffle” and tuck a straight pipe out the back. The 3.6L sounds great without the suitcase and there’s no drone. An over the axle eliminator kit for the JL is $75.00 and a good shop can bend and install something similar on the cheap.

 

[smlobx]

These are “cat-back” systems and no, these will not impact warranty. Also, if you want to save $$$, just have a muffler shop eliminate your “suitcase baffle” and tuck a straight pipe out the back. The 3.6L sounds great without the suitcase and there’s no drone. An over the axle eliminator kit for the JL is $75.00 and a good shop can bend and install something similar on the cheap.

What is the “Suitcase Baffle” you’re referring to.
I was under the truck this evening talking to a company about a long range fuel tank and noticed that there are actually THREE mufflers/baffles...

 

[Flying J]

What would be the easiest way to increase the horsepower to over 300hp... just sounds better. Lol

Exhaust + cold air intake?

Go!

Put in one of these
Ferrari-derived engine produces 505 horsepower and 443 lb-ft of torque and a spine-tingling timbre that shames most rivals.
Fiat owns FCA+ Ferrari+ ALFA Romeo+ Jeep = Ferrari powered Jeep!

 

[smlobx]

^^^

Well Alpha is part of the FCA family....

Sponsored