Front fender height vs rear?

[Eazye]

I’ve searched and there are about 1000 threads or more with fender height mentioned. Can someone tell me how much higher the front fender should be on a Rubicon vs the back fender if its leveled? Just measuring to the bottom of the fender, what is the difference in height? I’d greatly appreciate it, thanks!

Sponsored

 

[Eazye]

This one should be easy, if someone has a new Gladiator Rubicon that has only been leveled, regardless of tire size, I just need the difference in fender height between the front and rear.

 

[Gvsukids]

This one should be easy, if someone has a new Gladiator Rubicon that has only been leveled, regardless of tire size, I just need the difference in fender height between the front and rear.

Like this?
https://www.jeepgladiatorforum.com/...e-stock-height-measurements.24604/post-387691
Or find out what the rake is on a Rubicon and and the fever height to that rake.

 

[Eazye]

Like this?
https://www.jeepgladiatorforum.com/...e-stock-height-measurements.24604/post-387691
Or find out what the rake is on a Rubicon and and the fever height to that rake.

Yeah, I saw that thread and they said that it was the launch edition and was perfectly level from the factory. I wasn’t sure as Im not all that familiar with the LE Rubicon and what it’s differences might be.

I think the fender on the front should measure higher than the rear on the Rubi if it’s leveled. I just don’t know how much higher….

 

[Rusty PW]

To see if it's leveled. Measure at the front of the rock rail and the rear of the rock rail. That's what Clayton told me to do. Before i put the beta test springs on. At the rock rail. I was 16" and 18". After it was 17' and 18 1/8". At the fenders from the ground up. It measures 41" both front and rear now.

Sponsored