LakeMAnn
Active Member
- Joined
- Aug 10, 2018
- Threads
- 4
- Messages
- 37
- Reaction score
- 99
- Location
- NW New Jersey
- Vehicle(s)
- 2020 JT Mojave, 2108 JLUSahara
Not sure if this helps...
Front
Rear
Front
Rear
Sponsored
Sponsored
KurtP
Well-Known Member
Hey, thanks for that. Appreciate it. I think for my purpose I really need to get tire variance out and get something from the axle to another point. Being off by even 1/2” would be a big deal.Not sure if this helps...
Front
Rear
gouacats
Well-Known Member
This is interesting. When I did my measurements for my weight distribution hitch, I measured 40 1/8" from ground to bottom of the fender lip. Yours appears to be almost 3/4" or so less than that. Same tires, no lift, etc.Not sure if this helps...
Front
Rear
BlueMojave
Member
- First Name
- Dave
- Joined
- Jan 7, 2021
- Threads
- 0
- Messages
- 9
- Reaction score
- 10
- Location
- Upper Peninsula Michigan
- Vehicle(s)
- 2020 Jeep Gladiator Mojave
- Occupation
- Engineer
2020 Mojave up in the Upper Peninsula....
Sponsored
MoparToYou
Well-Known Member
How high is the front fender on your Mojave KurtP? If I measure mine the same as LakeMAnn does, I get a measurement of 44 1/2". I am running 37s and use a spacer of exactly 2 1/2" with stock Mojave springs. If you measure the same height with your Mojave, and your 37s are close to the same height as my 37s, then you have 2 1/2" of lift.
KurtP
Well-Known Member
What youre saying is logical; but Tire variances can be weird. Mine measures 46.5”; and i know it didnt come up 4-4.5”.... fyi: im measuring to @LakeMAnn black/paint line as my reference.
My tires account for 2” (31.5-35.5 on truck) i think this lift is 3”. So from 46.5 - 5 puts me at 41.5. I guess we could take tire out of it by measuring ground to bottom of axle.
See? For all my experience, i still forgot to measure pre and post.
Last edited:
Sponsored
DbMojave21
Active Member
- First Name
- Dino
- Joined
- Jan 30, 2021
- Threads
- 2
- Messages
- 42
- Reaction score
- 41
- Location
- Des Moines Iowa
- Vehicle(s)
- 2014 Wrangler unlimited Rubicon, 2021 Gladiator Mo
- Occupation
- Financial
Hey guys. Been struggling to find 2.5" spacer lift for mojave. I did see the ones with spring replacement but I do want to keep it all stock. Adding spacers and shock extension. Anyone found a good place that's reasonable. Everywhere i looked, it states mojave excluded
Thanks.
I have 35" tires and i measure 42.5 front to the fender line where typically the transition from paint to plastic goes and 42" rear. Running 45 psi on tires. That matters as well. If you're running low 30s you'll probably drop half an inch
Thanks.
I have 35" tires and i measure 42.5 front to the fender line where typically the transition from paint to plastic goes and 42" rear. Running 45 psi on tires. That matters as well. If you're running low 30s you'll probably drop half an inch
GreenMan
Well-Known Member
- Joined
- Jun 29, 2017
- Threads
- 7
- Messages
- 91
- Reaction score
- 173
- Location
- Atlanta, GA
- Vehicle(s)
- 2020 Jeep Gladiator Mojave
Love my Mojave!
GreenMan
Well-Known Member
- Joined
- Jun 29, 2017
- Threads
- 7
- Messages
- 91
- Reaction score
- 173
- Location
- Atlanta, GA
- Vehicle(s)
- 2020 Jeep Gladiator Mojave
It's the Rugged Ridge Arcus without the overrider bar. Those are Nitto Trail Grapplers in a 35x11.50 on the stock rims. Great fit and perform well. We have taken several trails with them without issue.
Toyfrog
Well-Known Member
Looks Great. Just picked mine up 2 weeks ago. Going this weekend to order wheels and tires. Did you notice any sag in the front after the bumper/winch in stall? ThanksLove my Mojave!
Sponsored
