mine was the same way, didn't fit up against the plasticI ordered some mudflaps for my Max tow. Fronts fit perfect. Rears won't line up correctly.. not sure what I am missing but they simply won't line up at inside edge. Are they all the same? They are Mopar and say JT right on them
I ended up putting 2 bolts nuts on fender flares , no plastic rivets,and cut off that piece that had to rivet to inner fender liner, with my 315 70 17 tires with no lift on back they would have hit the mud flap easy with any weight in back or flexingI ended up using 1/4" nut and bolts and just secured that way. Right inside the lip had a small brace so I used same there and drilled hole
I'm going to try and put mine on this weekend. I found one of the tools with 40 rivets at Harbor Freight for $17.I just tried to put my rear ones on today but the included plastic rivets are too big for the attachments on my rivet gun. Does anyone know what size they are? There's no info on the instructions on the size.
edit: looks like I need to get a poly plastic rivet gun