New TUWA PRO®️ 4CX SERIES MESA VERDE BED RACK SYSTEM Coming This September!

[red/green hawk]

Hey Henry!

I am attaching some pictures and an assembly video, in theory if you have a t slot in your bed rail you should be able to install it without the mount bases but we have not done it here at Tuwa Pro. I wish I had a picture of it so I could give you a better insight! Hope this helps

Mounting with our Mount base:

In your case this two bolts would go in your Bed Rail T Slot with some T Nuts

Here is part of an assembly video showing where our bases connect with the structure of the rack

It looks like it is not compatible with Trail Rail System. Is that correct?

Sponsored

 

[Tuwa Pro]

It looks like it is not compatible with Trail Rail System. Is that correct?

It is compatible! If you have the Trail Rail System you would need to get this T Slot Nuts (8mm). They go on the inside of the rail and you would use them to bolt the mount bases!

 

[Jerhemi]

Hey Jerhemi! Sadly we have tried with the OEM Mopar Soft Tonneau Cover but it wont work with our design, we have try to find ways to adapt it without compromising the performance of the product but haven't found the ideal way just yet. ? Sorry about that!

Thank you very much for considering us, we really appreciate it!

I am tempted to get one and make my own / modify your "base connectors". Looks like they just need to be a bit deeper. I really dig the versatility and looks of your rack.

 

[Frenzyrider]

What is the differentiator for it than more tested out JCR, Max Modular, or RCI? The best one I have seen so far is Rebel Xplor but it is a high price point.
Trying to really understand the differentiator here. Is it soft topper compatible, anything else?

 

[Tuwa Pro]

What is the differentiator for it than more tested out JCR, Max Modular, or RCI? The best one I have seen so far is Rebel Xplor but it is a high price point.
Trying to really understand the differentiator here. Is it soft topper compatible, anything else?

Hey! That is an awesome question. Our Patent Pending 4CX Series Bed Racks have several unique features. First, it is compatible with selected soft tonneau covers (No OEM Mopar) and also retractable hard tonneau covers! Also, one of the main features is that we offer 3 height options in our system: 17 ”(Below cabin level) / 19.5” (Cabin level) / 23 ”(Above cabin level). Secondly, our system offers you the possibility of having a Chase Rack and a Bed Rack in the same system, whenever you need the space in the bed for tall items (bikes, furniture, etc) you can take off the rear bar and still have an awesome chase rack! Thirdly, we offer sets of Cross Bars that you can install as roof bars and side bars giving you the ability of customize them as you need or please. As you can see what different about our product is having the ability of constantly customizing your bed accessories according to your needs! If you have any other question we would be more than happy to help! Thank you

 

[Tuwa Pro]

I am tempted to get one and make my own / modify your "base connectors". Looks like they just need to be a bit deeper. I really dig the versatility and looks of your rack.

Thank you Jerhemi, if you would like to PM us so we can give you specific measurements and pictures maybe this will help you a bit more in your project! Happy to help.

 

[Iamstubb]

I have a drop-in bed liner. It looks like it should work. Has it been tested? Also I am wondering it is compatible with the BAK rollup X4s which also uses internal rails like the Access tonneau

 

[Tuwa Pro]

I have a drop-in bed liner. It looks like it should work. Has it been tested? Also I am wondering it is compatible with the BAK rollup X4s which also uses internal rails like the Access tonneau

Hello Mark! It depends on the type of drop-in bed liner, is it an over rail or an under rail? We will PM you to give you a more detailed explanation. Also, the BAK Rollup X4s Cover should work fine with our system, the only downside is that because of the angles in our chase rack and the way that the BAK system works increasing it size as it goes back it can get a little tedious to open it all the way, this is a point to consider. However, these pictures are with the MOAB model, with the MESA VERDE you could get a better performance because the front base is smaller than the MOAB and you don't have the side mountain panels in the front either. I am attaching some pictures with a different cover as reference so you can see the angles from a better point of view.

MOAB angles with side mountain panels:

MESA VERDE:

 

[Iamstubb]

Thanks for getting back quickly. My bedliner is under the rail. I pm'd pictures. Does you system clamp into trail rails or to the bed rail itself? A little hard to tell from pictures. Also-It looks like one could add additional rails for coverage on both top and sides. Would those be available? Just dreaming at this point!

 

[Tuwa Pro]

Thanks for getting back quickly. My bedliner is under the rail. I pm'd pictures. Does you system clamp into trail rails or to the bed rail itself? A little hard to tell from pictures. Also-It looks like one could add additional rails for coverage on both top and sides. Would those be available? Just dreaming at this point!

No problem! We love to help. We PM'd you about your bed liner and also about your other inquiry! Also, our system works just fine with trail rails system and without them as well! If you have the trail rail system all you would need to to is buy some 8mm t-slot nuts from amazon and you will be set we send the link to all of our customers so they have the right pieces! I will attach some pictures as reference

No trail rail system:

With Trail Rail System:

 

[Free2roam]

Or you can just cut the ones down they sent you and paint them black. I believe the measurement was 15/16? If you have the trail rail system.

 

[Iamstubb]

Got it! Nice mounting configuration!

 

[Tuwa Pro]

Or you can just cut the ones down they sent you and paint them black. I believe the measurement was 15/16? If you have the trail rail system.

Correct! Thank you Robert for your awesome help and ideas, in the near future we will have our own mountings that will go inside the rail!

Best Regards, your friends at TUWA Pro!

 

[Tuwa Pro]

Got it! Nice mounting configuration!

Thank you Mark!

 

[Krash1642]

What will be the difference between the MOAB and the MESA systems? .. also what is the price difference between the two? Thank you!!

Sponsored