2020 SCRAMBLER
Well-Known Member
- Joined
- Jul 30, 2018
- Threads
- 18
- Messages
- 525
- Reaction score
- 899
- Location
- Los Angeles
- Vehicle(s)
- 2020 Jeep Gladiator
- Thread starter
- #1
@BestopTeam @Cassie
Recently I ordered my Gladiator with only a hardtop as I do not like the OEM soft top folding design that sits on top of the truck.
However I’m thinking about my old CJ-7’s soft top and soft doors - completely removable while away from home and able to be stored in the back of the CJ while driving around...
Has any thought been given to developing...
- NEW SOFT TOP FRAME: telescopic soft top frame tubes...supports mid and rear roof points (these frame tubes would stay attached to JT and collapse/fold down BEHIND rear seat). ...a separate soft top support frame tube supports roof over the driver (this folds back to speaker bar or just disconnects when top off)...use same header panel to connect & latch top on front (also removable but pivots up in front)
- slight variation on the OEM vinyl soft top design (this now removes completely from above new frame)...recycle as much of design as possible
- NEW SOFT DOORS: metal soft door frames...canvas covered door frames matches soft top...upper window in clear vinyl zips off...rotating handle to latch door shut
Idea is that the soft top could be easily removed from this new Gladiator soft top frame (like a CJ-7) and the top skin rolled up and put under the rear seat
Then the 4 soft doors get removed (if one wants) and stacked up against front of truck bed wall and velcro strapped in place.
This way you can take your top and doors around with you and put it back on (or take it off) while away from home.
Ultimate flexibility and versatility for complete open air riding! But security of having a top with you at all times should the weather get bad.
Pile on thoughts and follow-up posts fellow JT owners so Bestop and others might consider making this a reality!
And JL owners too...you know you want soft doors!
Recently I ordered my Gladiator with only a hardtop as I do not like the OEM soft top folding design that sits on top of the truck.
However I’m thinking about my old CJ-7’s soft top and soft doors - completely removable while away from home and able to be stored in the back of the CJ while driving around...
Has any thought been given to developing...
- NEW SOFT TOP FRAME: telescopic soft top frame tubes...supports mid and rear roof points (these frame tubes would stay attached to JT and collapse/fold down BEHIND rear seat). ...a separate soft top support frame tube supports roof over the driver (this folds back to speaker bar or just disconnects when top off)...use same header panel to connect & latch top on front (also removable but pivots up in front)
- slight variation on the OEM vinyl soft top design (this now removes completely from above new frame)...recycle as much of design as possible
- NEW SOFT DOORS: metal soft door frames...canvas covered door frames matches soft top...upper window in clear vinyl zips off...rotating handle to latch door shut
Idea is that the soft top could be easily removed from this new Gladiator soft top frame (like a CJ-7) and the top skin rolled up and put under the rear seat
Then the 4 soft doors get removed (if one wants) and stacked up against front of truck bed wall and velcro strapped in place.
This way you can take your top and doors around with you and put it back on (or take it off) while away from home.
Ultimate flexibility and versatility for complete open air riding! But security of having a top with you at all times should the weather get bad.
Pile on thoughts and follow-up posts fellow JT owners so Bestop and others might consider making this a reality!
And JL owners too...you know you want soft doors!
Sponsored
Last edited: