O

[jeepers29]

I used a floor jack for jamb nuts.

Sponsored

 

[legacy_etu]

Ha, nice . I just had to deal with this on a cross threaded nut. Gave up and brought it to my local garage who powered the nut off for $10.

 

[Hootbro]

I do not think the painted bumper cover is going to survive the pipe wrench being leveraged against it.

 

[Rusty PW]

I do not think the painted bumper cover is going to survive the pipe wrench being leveraged against it.

If it works, think the guy at this point really don't cares. Long as it gets remove.

 

[Hootbro]

If it works, think the guy at this point really don't cares. Long as it gets remove

I do not know. I have been there where I solved one problem and created another wishing I had left the first problem alone.

 

[Rusty PW]

I do not know. I have been there where I solved one problem and created another wishing I had left the first problem alone.

I've done the same thing.

Just remember. You are one broken away from turning a 2 hour job into a 3 day shit show.

 

[legacy_etu]

I do not know. I have been there where I solved one problem and created another wishing I had left the first problem alone.

Been there, done that.

 

[legacy_etu]

I've done the same thing.

Just remember. You are one broken away from turning a 2 hour job into a 3 day shit show.

Yup, if I was thinking more clearly I would have busted out my angle grinder and cutoff wheel and removed the stuck on trailer hitch myself.

 

[Lunentucker]

 

[Alfonz]

 

[Alfonz]

 

[Alfonz]

 

[Alfonz]

 

[Alfonz]

 

[Alfonz]

Sponsored