Oculus halo lights and fog lights

[Sammar]

I'm going to replace my stock lights with the Oculus halo lights. I understand how to install both the headlights and fog lights but want to connect the fog light halos to the headlight halos so they both serve as drl. I understand I need to connect the fog light halo wire to the headlight halo wire before I connect the drl into the fuse box but I'm unsure of exactly how to splice those wires together. I will need extra wire and connectors but don't understand the specifics of how to do that and exactly what to buy. Need some clear step by step help please. Sorry for the long post.

Sponsored

 

[JP_Oracle]

I'm going to replace my stock lights with the Oculus halo lights. I understand how to install both the headlights and fog lights but want to connect the fog light halos to the headlight halos so they both serve as drl. I understand I need to connect the fog light halo wire to the headlight halo wire before I connect the drl into the fuse box but I'm unsure of exactly how to splice those wires together. I will need extra wire and connectors but don't understand the specifics of how to do that and exactly what to buy. Need some clear step by step help please. Sorry for the long post.

Hey Mark,

You actually shouldn't need anything extra than what comes in the box with the fogs to do this!

You'll see there's an extra set of cables and a pack of t-taps & male spade connectors. All you need to do, is expose some of the red & black wire on the headlight DRL cables right where they meet the plugs for the headlights (Simply split that black wire casing to do this), then use the taps and spades to connect your fog cables in (red to red - black to black)

Hope this helps!

 

[Sammar]

Hey Mark,

You actually shouldn't need anything extra than what comes in the box with the fogs to do this!

You'll see there's an extra set of cables and a pack of t-taps & male spade connectors. All you need to do, is expose some of the red & black wire on the headlight DRL cables right where they meet the plugs for the headlights (Simply split that black wire casing to do this), then use the taps and spades to connect your fog cables in (red to red - black to black)

Hope this helps!

That makes sense. Please see the attached pic to verify I'm right. I'll need to tap in 2 places. I assume the fuse (#52) will be able to handle all 4 lights

 

[JP_Oracle]

That makes sense. Please see the attached pic to verify I'm right. I'll need to tap in 2 places. I assume the fuse (#52) will be able to handle all 4 lights

You can definitely do that this way. Also, those fuses are plenty.

 

[Sammar]

You can definitely do that this way. Also, those fuses are plenty.

Took my time and after almost 2 hours it all worked on the first try. Thanks for the advice

The 2nd pic is only the DRL.

 

[ORACLElights]

Took my time and after almost 2 hours it all worked on the first try. Thanks for the advice

The 2nd pic is only the DRL.

Looks awesome, Mark! Glad we could help. Please reach out if you encounter any other questions with your lights, and our team will be happy to help!

-Rachel

Sponsored